DataSheetWiki


CAT5114 fiches techniques PDF

ON Semiconductor - 32-Tap Digitally Potentiometer

Numéro de référence CAT5114
Description 32-Tap Digitally Potentiometer
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





CAT5114 fiche technique
CAT5114
32‐tap Digital
Potentiometer (POT)
Description
The CAT5114 is a single digital POT designed as an electronic
replacement for mechanical potentiometers and trim pots. Ideal for
automated adjustments on high volume production lines, they are also
well suited for applications where equipment requiring periodic
adjustment is either difficult to access or located in a hazardous or
remote environment.
The CAT5114 contains a 32-tap series resistor array connected
between two terminals RH and RL. An up/down counter and decoder
that are controlled by three input pins, determines which tap is
connected to the wiper, RW. The wiper setting, stored in nonvolatile
memory, is not lost when the device is powered down and is
automatically reinstated when power is returned. The wiper can be
adjusted to test new system values without affecting the stored setting.
Wiper-control of the CAT5114 is accomplished with three input
control pins, CS, U/D, and INC. The INC input increments the wiper
in the direction which is determined by the logic state of the U/D input.
The CS input is used to select the device and also store the wiper
position prior to power down.
The digital POT can be used as a three-terminal resistive divider or
as a two-terminal variable resistor. Digital POTs bring variability and
programmability to a wide variety of applications including control,
parameter adjustments, and signal processing.
Features
32-position Linear Taper Potentiometer
Non-volatile EEPROM Wiper Storage
Low Standby Current
Single Supply Operation: 2.5 V 6.0 V
Increment Up/Down Serial Interface
Resistance Values: 10 kW, 50 kW and 100 kW
Available in PDIP, SOIC, TSSOP, MSOP and Space Saving
2 3 mm TDFN Packages
These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
Automated Product Calibration
Remote Control Adjustments
Offset, Gain and Zero Control
Tamper-proof Calibrations
Contrast, Brightness and Volume Controls
Motor Controls and Feedback Systems
Programmable Analog Functions
http://onsemi.com
SOIC8
V SUFFIX
CASE 751BD
MSOP8
Z SUFFIX
CASE 846AD
PDIP8
L SUFFIX
CASE 646AA
TSSOP8
Y SUFFIX
CASE 948AL
TDFN8
VP2 SUFFIX
CASE 511AK
PIN CONFIGURATIONS
INC
U/D
RH
GND
1
VCC
CS
RL
RWB
PDIP (L), SOIC (V), MSOP (Z)
1
CS
VCC
INC
U/D
TSSOP (Y)
RL
RWB
GND
RH
INC
U/D
RH
GND
1
TDFN (VP2)
(Top Views)
VCC
CS
RL
RWB
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
Semiconductor Components Industries, LLC, 2013
June, 2013 Rev. 23
1
Publication Order Number:
CAT5114/D

PagesPages 15
Télécharger [ CAT5114 ]


Fiche technique recommandé

No Description détaillée Fabricant
CAT511 8-Bit Digital POT with Independent Reference Inputs Catalyst Semiconductor
Catalyst Semiconductor
CAT5110 32-tap Digital Potentiometers ON Semiconductor
ON Semiconductor
CAT5110 (CAT5110 - CAT5125) Digitally Programmable Potentiometers Catalyst Semiconductor
Catalyst Semiconductor
CAT5111 100-Tap Digitally Programmable Potentiometer ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche