|
|
PDF VLA106-15252 Data sheet ( Hoja de datos )
| Número de pieza | VLA106-15252 | |
| Descripción | DC-DC CONVERTER | |
| Fabricantes | Isahaya Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VLA106-15252 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
HYBRID IC
VLA106-15252
ISOLATED TYPE DC-DC CONVERTER
DESCRIPTION
The VLA106-15252 is a DC-DC converter. Its output
power is 2.5W and the input is isolated from the output.
The over-current protection circuit is built-in and it is the
best for on-board power supplies, such as industrial
equipment and control equipment.
OUTLINE DRAWING
33.0 MAX
Dimensions: mm
FEATURES
•Input voltage range: 12.0 to 18.0V DC
•Output: +25.2V, 100mA (output power: 2.5W)
•Thin-profile and lightweight design
•Isolation between input and output : 2500Vrms, 1min
•Built-in over-current protection circuit
APPLICATIONS
On-board power supplies control equipment
15252
XXXX
0.5 +0.1/-0.05
4.5 MAX
1
2.54 x 10=25.4
5.5 MAX
4.5 MAX
11
0.25 +0.2/-0.05
13.5 MAX
18 MAX
BLOCK DIAGRAM
+VIN
8
9
10
-VIN 11
FILTER
DRIVE
CIRCUIT
OVER- CURRENT
PROTECTION
FILTER
CONSTANT
VOLTAGE
CIRCUIT
3 +Vo1
5.6k
ohm
2 +Vo2
Vz=8.2V
1 -Vo
OPTO COUPLER
1 page  
HYBRID IC
VLA106-15252
ISOLATED TYPE DC-DC CONVERTER
FOR SAFETY USING
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production,
and in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage.
When handling Hics, please note the following cautions.
CAUTIONS
Packing
Carrying
Storage
Extended storage
Maximum ratings
Polarity
The materials used in packing Hics can only withstand normal external conditions.
When exposed to outside shocks, rain and certain environmental contaminators, the packing
materials will deteriorates. Please take care in handling.
1) Don’t stack boxes too high. Avoid placing heavy materials on boxes.
2) Boxes must be positioned correctly during transportation to avoid breakage.
3) Don't throw or drop boxes.
4) Keep boxes dry. Avoid rain or snow.
5) Minimal vibration and shock during transportation is desirable.
When storing Hics, please observe the following notices or possible deterioration of their electrical
characteristics, risk of solderability, and external damage may occur.
1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must
not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius
with humidity at 40 to 60%.
2) Avoid locations where corrosive gasses are generated or where much dust accumulates.
3) Storage cases must be static proof.
4) Avoid putting weight on boxes.
When extended storage is necessary, Hics must be kept non-processed. When using Hics which
have been stored for more than one year or under severe conditions, be sure to check that the
exterior is free from flaw and other damages.
To prevent any electrical damages, use Hics within the maximum ratings. The temperature,
current, voltage, etc. must not exceed these conditions.
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in
inserting leads into the board holes, conforming to the external view for the terminal arrangement.
5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet VLA106-15252.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VLA106-15252 | DC-DC CONVERTER | Isahaya Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |