DataSheetWiki


QPA9119 fiches techniques PDF

TriQuint Semiconductor - High Linearity Amplifier

Numéro de référence QPA9119
Description High Linearity Amplifier
Fabricant TriQuint Semiconductor 
Logo TriQuint Semiconductor 





1 Page

No Preview Available !





QPA9119 fiche technique
Applications
Repeaters / DAS
Mobile Infrastructure
Defense Communications
General Purpose Wireless
QPA9119
½ W High Linearity Amplifier
Product Features
400-4200 MHz
+27.2 dBm P1dB
+44 dBm Output IP3
17 dB Gain at 2140 MHz
+5 V Single Supply, 130 mA ICQ
Internal RF overdrive protection
Internal DC overvoltage protection
On chip ESD protection
3x3 mm QFN Package
General Description
The QPA9119 is a high linearity driver amplifier in a low-
cost, RoHS compliant, surface mount package. This
InGaP/GaAs HBT delivers high performance across a
broad range of frequencies with +44dBm OIP3 and
+27.2dBm P1dB while only consuming 130mA quiescent
current. All devices are 100% RF and DC tested.
The QPA9119 incorporates on-chip features that
differentiate it from other products in the market. The
amplifier integrates an on-chip DC over-voltage and RF
over-drive protection. This protects the amplifier from
electrical DC voltage surges and high input RF input
power levels that may occur in a system. On-chip ESD
protection allows the amplifier to have a very robust Class
1C HBM ESD rating.
The QPA9119 is targeted for use as a driver amplifier in
wireless infrastructure where high linearity, medium
power, and high efficiency are required. The device an
excellent candidate for transceiver line cards in current
and next generation multi-carrier 3G / 4G base stations.
16-Pin 3x3mm Leadless QFN Package
Functional Block Diagram
Pin 1 Reference Mark
NC I Ref NC
16 15 14
NC 1
RF In 2
Bias
NC
13
12 NC
11 RF Out
RF In 3
10 RF Out
NC 4
9 NC
5678
NC NC NC NC
Backside Paddle - RF/DC GND
Top View
Pin Configuration
Pin No.
Label
1, 4, 5, 6, 7, 8, 9, 12, 13, 14, 16 No Connection
2, 3 RF In
10, 11
RF Out
15 I Ref
Backside Paddle
GND
Ordering Information
Part No.
Description
QPA9119
0.5 W High Linearity Amplifier
QPA9119−PCB900 869960MHz Evaluation Board
QPA9119−PCB2140 2.112.17 GHz Evaluation Board
Standard T/R size = 2,500 pieces on a 7” reel
Data Sheet: Rev. E 09-24-15
© 2015 TriQuint Semiconductor, Inc
- 1 of 12 -
Disclaimer: Subject to change without notice
www.Qorvo.com / www.qorvo.com

PagesPages 12
Télécharger [ QPA9119 ]


Fiche technique recommandé

No Description détaillée Fabricant
QPA9119 High Linearity Amplifier TriQuint Semiconductor
TriQuint Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche