|
|
PDF ADUM5410 Data sheet ( Hoja de datos )
| Número de pieza | ADUM5410 | |
| Descripción | Quad-Channel Isolators | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADUM5410 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
|
No Preview Available !
Data Sheet
Quad-Channel Isolators with
Integrated DC-to-DC Converters
ADuM5410/ADuM5411/ADuM5412
FEATURES
isoPower integrated, isolated dc-to-dc converter
Up to 150 mW output power
Quad dc to 150 Mbps signal isolation channels
24-lead SSOP package with 5.3 mm minimum creepage
High temperature operation: 105°C
High common-mode transient immunity: 100 kV/μs
Safety and regulatory approvals
UL recognition (pending)
2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice 5A (pending)
VDE certificate of conformity (pending)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 565 V peak
APPLICATIONS
RS-232 transceivers
Power supply startup bias and gate drives
Isolated sensor interfaces
Industrial PLCs
GENERAL DESCRIPTION
The ADuM5410/ADuM5411/ADuM54121 are quad-channel
digital isolators with isoPower®, integrated, isolated dc-to-dc
converters. Based on the Analog Devices, Inc., iCoupler®
technology, the dc-to-dc converters provide regulated, isolated
power that is adjustable between 3.15 V and 5.25 V. Popular
voltage combinations and the associated power levels are shown
in Table 1.
The ADuM5410/ADuM5411/ADuM5412 eliminate the need
for a separate, isolated dc-to-dc converter in low power, isolated
designs. The iCoupler chip scale transformer technology is used for
isolated logic signals and for the magnetic components of the
dc-to-dc converters. The result is a small form factor, total
isolation solution.
The ADuM5410/ADuM5411/ADuM5412 isolators provide four
independent isolation channels in a variety of channel configura-
tions and data rates (see the Ordering Guide for more
information).
FUNCTIONAL BLOCK DIAGRAM
VDD1 1
GND1 2
I/O1A 3
I/O1B 4
I/O1C 5
I/O1D 6
VE1 7
NIC 8
GND1 9
PDIS 10
VDDP 11
GND1 12
4-CHANNEL iCoupler CORE
ADuM5410/ADuM5411/
ADuM5412
PCS
OSC
RECT REG
24 VDD2
23 GNDISO
22 I/O2A
21 I/O2B
20 I/O2C
19 I/O2D
18 VE2
17 NIC
16 GNDISO
15 VSEL
14 VISO
13 GNDISO
NIC = NO INTERNAL CONNECTION. LEAVE THIS PIN FLOATING.
Figure 1.
Table 1. Power Levels
Input Voltage (V) Output Voltage (V)
55
5 3.3
3.3 3.3
Output Power (mW)
150
100
66
Table 2. Data Input/Output Port Assignments
Ch. Pin No. ADuM5410 ADuM5411
I/O1A 3
VIA
VIA
I/O1B 4
VIB
VIB
I/O1C 5
VIC
VIC
I/O1D 6
VID
VOD
I/O2A 22
VOA
VOA
I/O2B 21
VOB
VOB
I/O2C 20
VOC
VOC
I/O2D 19
VOD
VID
ADuM5412
VIA
VIB
VOC
VOD
VOA
VOB
VIC
VID
1 Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329. Other patents are pending.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
1 page  
Data Sheet
ADuM5410/ADuM5411/ADuM5412
ELECTRICAL CHARACTERISTICS—3.3 V PRIMARY INPUT SUPPLY/3.3 V SECONDARY ISOLATED SUPPLY
All typical specifications are at TA = 25°C, VDD1 = VDDP = VISO = 3.3 V, VSEL resistor network: R1 = 10 kΩ, ±1%, R2 = 16.9 kΩ ± 1% between
VISO and GNDISO (see Figure 31). Minimum/maximum specifications apply over the entire recommended operation range, which is
3.0 V ≤ VDD1, VDDP, VISO ≤ 3.6 V, and −40°C ≤ TA ≤ +105°C, unless otherwise noted. Switching specifications are tested with CL = 15 pF
and CMOS signal levels, unless otherwise noted.
Table 7. DC-to-DC Converter Static Specifications
Parameter
Symbol Min Typ Max Unit
Test Conditions/Comments
DC-TO-DC CONVERTER SUPPLY
Setpoint
VISO 3.0 3.3 3.6 V
IISO = 10 mA, R1 = 10 kΩ, R2 = 16.9 kΩ
Line Regulation
VISO (LINE)
20
mV/V
IISO = 10 mA, VDD1 = 3.0 V to 3.6 V
Load Regulation
VISO (LOAD)
15
%
IISO = 2 mA to 18 mA
Output Ripple
VISO (RIP) 50 mV p-p 20 MHz bandwidth, CBO = 0.1 µF||10 µF, IISO = 18 mA
Output Noise
VISO (NOISE) 130 mV p-p CBO = 0.1 µF||10 µF, IISO = 18 mA
Switching Frequency
fOSC
125 MHz
Pulse-Width Modulation Frequency fPWM
600 kHz
Output Supply
IISO (MAX)
20
mA 3.6 V > VISO > 3 V
Efficiency at IISO (MAX)
27 % IISO = 18 mA
VDDP Supply Current
No VISO Load
IDDP (Q)
14 20 mA
Full VISO Load
IDDP (MAX)
77 115 mA
Thermal Shutdown
Shutdown Temperature
154 °C
Thermal Hysteresis
10 °C
Table 8. Data Channel Supply Current Specifications
1 Mbps
25 Mbps
100 Mbps
Parameter
Symbol Min Typ Max Min Typ Max Min Typ Max Unit Test Conditions/Comments
SUPPLY CURRENT
CL = 0 pF
ADuM5410
IDD1
6.6 9.8
7.4 11.2
10.7 15.9 mA
IDD2
2.0 3.7
3.5 5.5
8.2 11.6 mA
ADuM5411
IDD1
5.65 10.1
6.65 10.5
10.4 14.9 mA
IDD2
3.9 6.65
5.2 8.0
9.4 12.8 mA
ADuM5412
IDD1
4.3 7.7
5.6 9.0
9.1 13 mA
IDD2
5.0 8.4
6.2 9.6
9.8 13.7 mA
Table 9. Switching Specifications
Parameter
Symbol Min Typ Max Unit Test Conditions/Comments
SWITCHING SPECIFICATIONS
Pulse Width
PW 6.7
ns Within PWD limit
Data Rate
150 Mbps Within PWD limit
Propagation Delay
tPHL, tPLH
6.8 14 ns
50% input to 50% output
Pulse Width Distortion
PWD
0.7 3.0 ns
|tPLH − tPHL|
Change vs. Temperature
1.5 ps/°C
Propagation Delay Skew tPSK
7.5 ns
Between any two units at the same temperature, voltage, and load
Channel Matching
Codirectional
tPSKCD
0.7 3.0 ns
Opposing Direction
tPSKOD
0.7 3.0 ns
Jitter
640 ps p-p
75 ns rms
Rev. 0 | Page 5 of 29
5 Page 
Data Sheet
ADuM5410/ADuM5411/ADuM5412
ELECTRICAL CHARACTERISTICS—1.8 V OPERATION DIGITAL ISOLATOR CHANNELS ONLY
All typical specifications are at TA = 25°C, VDD1 = VDD2 = 1.8 V. Minimum/maximum specifications apply over the entire recommended
operation range: 1.7 V ≤ VDD1 ≤ 1.9 V, 1.7 V ≤ VDD2 ≤ 1.9 V, and −40°C ≤ TA ≤ +105°C, unless otherwise noted. Switching specifications
are tested with CL = 15 pF and CMOS signal levels, unless otherwise noted. Supply currents are specified with 50% duty cycle signals.
Table 18. Data Channel Supply Current Specifications
1 Mbps
25 Mbps
100 Mbps
Parameter
Symbol Min Typ Max Min Typ Max Min Typ Max Unit Test Conditions/Comments
SUPPLY CURRENT
ADuM5410
IDD1
6.4 9.8
7.2 11
10.2 15.2 mA
CL = 0 pF
IDD2
1.9 3.5
3.1 5.0
6.8 10 mA
ADuM5411
IDD1
5.5 9.1
6.3 10.0
9.6 14.0 mA
ADuM5412
IDD2
IDD1
3.72 6.45
4.3 7.7
4.8 7.5
5.3 8.7
8.4 11.2 mA
8.6 12.6 mA
IDD2
4.9 8.3
6.0 9.4
9.3 13.3 mA
Table 19. Switching Specifications
Parameter
Symbol Min Typ Max Unit Test Conditions/Comments
SWITCHING SPECIFICATIONS
Pulse Width
PW 6.6
ns Within PWD limit
Data Rate
150 Mbps Within PWD limit
Propagation Delay
tPHL, tPLH 5.8 8.7 15
ns
50% input to 50% output
Pulse Width Distortion
PWD
0.7 3
ns
|tPLH − tPHL|
Change vs. Temperature
1.5 ps/°C
Propagation Delay Skew tPSK
7.0 ns
Between any two units at the same temperature, voltage, and
load
Channel Matching
Codirectional
tPSKCD
0.7 3.0 ns
Opposing Direction
tPSKOD
0.7 3.0 ns
Jitter
470 ps p-p
70 ps rms
Rev. 0 | Page 11 of 29
11 Page | ||
| Páginas | Total 29 Páginas | |
| PDF Descargar | [ Datasheet ADUM5410.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADUM5410 | Quad-Channel Isolators | Analog Devices |
| ADUM5411 | Quad-Channel Isolators | Analog Devices |
| ADUM5412 | Quad-Channel Isolators | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |