|
|
PDF LTPL-C034UVH430 Data sheet ( Hoja de datos )
| Número de pieza | LTPL-C034UVH430 | |
| Descripción | C03 UV LED | |
| Fabricantes | LITE-ON Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LTPL-C034UVH430 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
Specific Lighting
Product Data Sheet
LTPL-C034UVH430
Spec No.: DS23-2016-0024
Effective Date: 03/19/2016
Revision: -
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
1 page  
5. Bin Code List
Specific Lighting
LTPL-C034UVH430 Datasheet
Vf Bin
V0
V1
V2
V3
Φe Bin
KL
MN
NO
OP
PR
Vf : Forward Voltage Spec. Table
Vf (V) @ If = 500mA
Min.
2.8
3.2
3.6
4.0
Forward Voltage Tolerance: +/- 0.1 V
Max.
3.2
3.6
4.0
4.4
Φe Radiant Flux Spec. Table
Φe (mW) @ If = 500mA
Min. Max.
775 835
835 900
900 975
975 1050
1050
1135
Radiant Flux Tolerance: +/- 7%
Wp Bin
P4F
P4G
Wp: Peak Wavelength Spec table
Wp (nm) @ If = 500mA
Min.
425
430
Peak Wavelength Tolerance: +/- 3nm
Max.
430
435
Notes:
1. Bin classification code is marked on each packing bag.
2. If there is any special or limited bin request, please contact with LiteOn’s sales
4/15
Part No. : LTPL-C034UVH430
BNS-OD-FC002/A4
5 Page 
Specific Lighting
LTPL-C034UVH430 Datasheet
Recommend Printed Circuit Board Attachment Pad
Notes:
1. The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended hand
soldering condition is 300°C max. and 2secs max. only once, and the operation of reflow soldering is only up to
three times at maximum.
2. All temperatures refer to topside of the package, measured on the package body surface.
3. The soldering profile could be further referred to different soldering grease material characteristic. The grease
vendor will provide this information.
4. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature.
5. Although the recommended reflow conditions are specified above, the reflow or hand soldering condition at
the lowest possible temperature is desirable for the LEDs.
6. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip soldering
method.
10/15
Part No. : LTPL-C034UVH430
BNS-OD-FC002/A4
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet LTPL-C034UVH430.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LTPL-C034UVH430 | C03 UV LED | LITE-ON Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |