DataSheetWiki


NCV7707B fiches techniques PDF

ON Semiconductor - Door-Module Driver-IC

Numéro de référence NCV7707B
Description Door-Module Driver-IC
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





NCV7707B fiche technique
NCV7707, NCV7707B
Door-Module Driver-IC
The NCV7707/B is a powerful Driver−IC for automotive body
control systems. The IC is designed to control several loads in the front
door of a vehicle. The monolithic IC is able to control mirror functions
like mirror positioning, heating and folding including the
electro−chromic mirror feature. Besides two half−bridge outputs to
control lock and safe−lock motors, the device features four high−side
outputs to drive LEDs or incandescent bulbs (up to 10 W). To allow
maximum flexibility, all lighting outputs can be PWM controlled thru
PWM inputs (external signal source) or by an internal programmable
PWM generator unit. The NCV7707/B is controlled thru a 24 bit SPI
interface with in−frame response.
Features
Operating Range from 5.5 V to 28 V
Six High−Side and Six Low−Side Drivers Connected as
Half−Bridges
2x Half−bridges Iload = 0.75 A; RDS(on) = 1.6 W @ 25°C
2x Half−Bridges Iload = 3 A; RDS(on) = 300 mW @ 25°C
2x Half−Bridges Iload = 6 A; RDS(on) = 150 mW @ 25°C
Four High−Side Lamp Drivers
2x LED; Iload = 0.3 A; RDS(on) = 1.4 W @ 25°C
2x 10 W; configurable as LED Driver; Iload = 2.5 A;
RDS(on) = 300 mW @ 25°C
One High−Side Driver for Mirror Heating; Iload = 6 A;
RDS(on) = 100 mW @ 25°C
Electro Chromic Mirror Control
1x 6−Bit Selectable Output Voltage Controller
1x LS for EC Control; Iload = 0.75 A; RDS(on) = 1.6 W @ 25°C
Independent PWM Functionality for All Outputs
Integrated Programmable PWM Generator Unit for All Lamp Driver
Outputs
Programmable Soft−start Function to Drive Loads with Higher
Inrush Currents as Current Limitation Value
Multiplex Current Sense Analog Output for Advanced Load
Monitoring
Very Low Current Consumption in Standby Mode
Charge Pump Output to Control an External Reverse Polarity
Protection MOSFET
24−Bit SPI Interface for Output Control and Diagnostic
Protection Against Short−circuit, Overvoltage and Overtemperature
AEC−Q100 Qualified and PPAP Capable
SSOP36−EP Power Package
This is a Pb−Free Device
Typical Applications
De−centralized Door Electronic Systems
Body Control Units (BCUs)
www.onsemi.com
SSOP36 EP
CASE 940AB
MARKING DIAGRAM
NCV7707x
AWLYYWWG
x = blank or B
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping
NCV7707DQR2G SSOP36−EP 1500 / Tape &
(Pb−Free)
Reel
NCV7707DQBR2G SSOP36−EP 1500 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2016
September, 2016 − Rev. 3
1
Publication Order Number:
NCV7707/D

PagesPages 30
Télécharger [ NCV7707B ]


Fiche technique recommandé

No Description détaillée Fabricant
NCV7707 Door-Module Driver-IC ON Semiconductor
ON Semiconductor
NCV7707B Door-Module Driver-IC ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche