|
|
PDF MBE0414 Data sheet ( Hoja de datos )
| Número de pieza | MBE0414 | |
| Descripción | Professional Thin Film Leaded Resistors | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MBE0414 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
Professional Thin Film Leaded Resistors
DESCRIPTION
MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414
professional leaded thin film resistors are the general
purpose resistor for all fields of professional electronics
where reliability and stability is of major concern. Typical
applications include industrial, telecommunication,
automotive, and medical equipment.
FEATURES
• CECC version (IECQ-CECC approved
according to EN 140101-806)
• Excellent overall stability: class 0.25
• Wide ohmic range: 0.22 Ω to 22 MΩ
• AEC-Q200 qualified available (1)
• Radial version available for MBB/SMA 0207
• Alternative termination wires available for e.g. welding
(MBA/SMA0204 only)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1) AEC-Q200 qualified parts are available per tables “Temperature
Coefficient and Resistance Range”.
APPLICATIONS
• Industrial
• Telecommunication
• Medical equipment
• Automotive
TECHNICAL SPECIFICATIONS
DESCRIPTION
MBA/SMA 0204
MBB/SMA 0207
DIN size
0204
0207
CECC size
AB
Resistance range
0.22 Ω to 10 MΩ; 0 Ω
0.22 Ω to 22 MΩ; 0 Ω
Resistance tolerance
± 5 %; ± 1 %; ± 0.5 %
Temperature coefficient
± 50 ppm/K; ± 25 ppm/K
Rated dissipation, P70 (2)
Operating voltage, Umax. AC/DC
Operating temperature range (2)
0.4 W
200 V
0.6 W
350 V
-55 °C to 155 °C
Peak permissible film temperature (2)
155 °C
155 °C
Insulation voltage:
1 min.; Uins
Continuous
300 V
75 V
500 V
75 V
Failure rate: FITobserved
≤ 0.1 x 10-9/h
≤ 0.1 x 10-9/h
Notes
• MB_ series has been merged with the related SMA series to form one series “MB_/SMA__”.
(2) Please refer to APPLICATION INFORMATION below.
MBE/SMA 0414
0414
D
0.22 Ω to 22 MΩ
1.0 W
500 V
155 °C
800 V
75 V
≤ 0.1 x 10-9/h
Revision: 02-Nov-15
1 Document Number: 28766
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - CECC Approved Products
TYPE
TCR
TOLERANCE
RESISTANCE (1)(2)
E-SERIES
±5%
0.22 Ω to 0.91 Ω
E24
± 50 ppm/K
±1%
1 Ω to 10 MΩ
E24; E96
MBA/SMA 0204
± 25 ppm/K
± 0.5 %
±1%
± 0.5 %
10 Ω to 475 kΩ
10 Ω to 475 kΩ
10 Ω to 475 kΩ
E24; E192
E24; E96
E24; E192
Jumper
± 50 ppm/K
-
±5%
±1%
< 10 mΩ; Imax. = 3 A
0.22 Ω to 0.91 Ω
11 MΩ to 22 MΩ
1 Ω to 10 MΩ
-
E24
E24; E96
MBB/SMA 0207
± 25 ppm/K
± 0.5 %
±1%
± 0.5 %
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
E24; E192
E24; E96
E24; E192
Jumper
-
±5%
< 10 mΩ; Imax. = 5 A
0.22 Ω to 0.91 Ω
-
E24
± 50 ppm/K
±1%
1 Ω to 22 MΩ
E24; E96
MBE/SMA 0414
± 0.5 %
10 Ω to 2.43 MΩ
E24; E192
± 25 ppm/K
±1%
± 0.5 %
10 Ω to 2.43 MΩ
10 Ω to 2.43 MΩ
E24; E96
E24; E192
Notes
• Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability.
(1) Resistance value to be selected from E24 series for ± 5 %, from E24/E96 series for ± 1 % tolerance and from E24/E192 for ± 0.5 % tolerance.
(2) AEC-Q200 qualification applies to products with TCR = ± 50 ppm/K and tolerance = ± 1 % in the ranges of 10 Ω to 301 kΩ for MBA/SMA
0204, 10 Ω to 7.5 MΩ for MBB/SMA 0207, and 10 Ω to 22 MΩ for MBE/SMA 0414.
Revision: 02-Nov-15
5 Document Number: 28766
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page 
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TESTS PROCEDURES AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
• EN 60115-1, generic specification (includes tests)
• EN 140100, sectional specification (includes schedule for
qualification approval)
• EN 140101-806 (successor of CECC 40101-806), detail
specification (includes schedule for conformance
inspection)
The test and requirements table contains only the most
important tests. For the full test schedule refer to the
documents listed above.
The tests are carried out in accordance with IEC 60068-2-xx
test method and under standard atmospheric conditions in
accordance with IEC 60068-1, 5.3.
Climatic category LCT / UCT / 56 (rated temperature range:
lower category temperature, upper category temperature;
damp heat, steady state, test duration: 56 days) is valid.
Unless otherwise specified the following values apply:
• Temperature: 15 °C to 35 °C
• Relative humidity: 45 % to 75 %
• Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
For performing some of the tests, the components are
mounted on a test board in accordance with IEC 60115-1,
4.31.
In Test Procedures and Requirements table, only the tests
and requirements are listed with reference to the relevant
clauses of IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given.
TEST PROCEDURES AND REQUIREMENTS
IEC
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST
PROCEDURE
Stability for product types:
MBA/SMA 0204
MBB/SMA 0207
REQUIREMENTS PERMISSIBLE CHANGE
(ΔR max.)
STABILITY
CLASS 0.5
STABILITY
CLASS 1
STABILITY
CLASS 2
1 Ω to 332 kΩ
0.22 Ω to < 1 Ω
> 332 kΩ
1 Ω to 1 MΩ
0.22 Ω to < 1 Ω
> 1 MΩ
4.5
4.7
4.8
4.13
4.16
4.17
4.18.2
4.19
4.22
4.23
4.23.2
4.23.3
4.23.4
4.23.5
4.23.6
4.23.7
-
-
-
-
21 (Ua1)
21 (Ub)
21 (Uc)
20 (Ta)
20 (Tb)
14 (Na)
6
2 (Ba)
30 (Db)
1 (Aa)
13 (M)
30 (Db)
Resistance
Voltage proof
Temperature
coefficient
Short time
overload
Robustness
of terminations
MBE/SMA 0414
-
URMS = Uins; 60 s
At (20 / -55 / 20) °C
and (20 / 155 / 20) °C
Room temperature;
U = 2.5 x P70 x R or
U = 2 x Umax.; 5 s
Tensile, bending,
and torsion
1 Ω to 2.4 MΩ
0.22 Ω to < 1 Ω
± 5 % R; ± 1 % R; ± 0.5 % R
No flashover or breakdown
± 50 ppm/K; ± 25 ppm/K
> 2.4 MΩ
± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
± 0.5 % R
no visible damage no visible damage no visible damage
± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
± 0.5 % R
+235 °C; 2 s; solder bath
Solderability
method; SnPb40
+245 °C; 3 s; solder bath
Good tinning
(> 95 % covered, no visible damage)
method; SnAg3Cu0.5
Resistance to Unmounted components; ± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
± 0.5 % R
soldering heat
(260 ± 5) °C; (10 ± 1) s
no visible damage no visible damage no visible damage
30 min at -55 °C
30 min at 155 °C
Rapid change
of temperature
5 cycles
MBA/SMA 0204: 500 cycles
MBB/SMA 0207: 200 cycles
MBE/SMA 0414: 100 cycles
± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
± 0.5 % R
± (0.5 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω)
10 sweep cycles per
Vibration
direction; 10 Hz to 2000 Hz ± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
1.5 mm or 200 m/s2
± 0.5 % R
Climatic
sequence:
Dry heat
155 °C; 16 h
Damp heat,
55 °C; 24 h;
cyclic
≥ 90 % to 100 % RH; 1 cycle
Cold
-55 °C; 2 h
Low air
8.5 kPa; 2 h;
pressure
15 °C to 35 °C
Damp heat,
55 °C; 5 days;
± (0.5 % R + 0.05 Ω) ± (1 % R + 0.05 Ω)
cyclic
≥ 95 % to 100 % RH; 5 cycles no visible damage no visible damage
± 2 % R
no visible damage
DC load
apply rated power for 1 min
Revision: 02-Nov-15
11 Document Number: 28766
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet MBE0414.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MBE0414 | Professional Thin Film Leaded Resistors | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |