DataSheetWiki


RHD5902 fiches techniques PDF

Cobham Semiconductor - Quad Operational Amplifier

Numéro de référence RHD5902
Description Quad Operational Amplifier
Fabricant Cobham Semiconductor 
Logo Cobham Semiconductor 





1 Page

No Preview Available !





RHD5902 fiche technique
RadHard-by-Design Analog
RHD5902
Quad Operational Amplifier, High Speed with Enables
Released Datasheet
Cobham.com/HiRel
March 28, 2016
The most important thing we build is trust
FEATURES
Single power supply operation (3.3V to 5.0V) or dual power supply operation (±1.65 to ±2.5V)
Radiation performance
- Total dose:
- ELDRS Immune
- SEL Immune
- Neutron Displacement Damage
> 1 Mrad(Si); Dose rate = 50-300 rad(Si)/s
> 100 MeV-cm2/mg
> 1014 neutrons/cm2
Unity Gain Bandwidth 35 MHz Typical
Rail-to-Rail input and output range
Enable pin to Enable/Disable amplifiers in pairs.
Short Circuit Tolerant
Full military temperature range
Designed for aerospace and high reliability space applications
Packaging – Hermetic ceramic SOIC
- 16-pin, .417"L x .300"W x .120"Ht
- Weight - 0.8 grams max
Radiation Hardness Assurance Plan: DLA Certified to MIL-PRF-38534, Appendix G.
GENERAL DESCRIPTION
The RHD5902 is a radiation hardened, single supply, high speed quad operational amplifier with enable in a
16-pin SOIC package. The RHD5902 design uses specific circuit topology and layout methods to mitigate total
ionizing dose effects and single event latchup. These characteristics make the RHD5902 especially suited for the
harsh environment encountered in Deep Space missions. It is guaranteed operational from -55°C to +125°C.
Available screened in accordance with MIL-PRF-38534 Class K, the RHD5902 is ideal for demanding military
and space applications.
ORGANIZATION AND APPLICATION
The RHD5902 amplifiers are capable of rail-to-rail input and outputs. Performance characteristics listed are for
general purpose operational 5V CMOS amplifier applications. The amplifiers will drive substantial resistive or
capacitive loads and are unity gain stable under normal conditions. Resistive loads in the low kohm range can be
handled without gain derating and capacitive loads of several nF can be tolerated. CMOS device drive has a
negative temperature coefficient and the devices are therefore inherently tolerant to momentary shorts, although
on chip thermal shutdown is not provided. All inputs and outputs are diode protected.
The devices will not latch with SEU events to above 100 MeV-cm2/mg. Total dose degradation is minimal to
above 1 Mrad(Si). Displacement damage environments to neutron fluence equivalents in the mid 1014 neutrons
per cm2 range are readily tolerated. There is no sensitivity to low-dose rate (ELDRS) effects. SEU effects are
application Dependant.
The RHD5902 is configured with enable/disable control. Pairs of amplifiers are put in a power-down condition
with their outputs in a high impedance state. Several useful operational amplifier configurations are supported
where more than one amplifier can feed an output with others disabled.
SCD5902
Rev C
1 Cobham Semiconductor Solutions
www.cobham.com/HiRel

PagesPages 9
Télécharger [ RHD5902 ]


Fiche technique recommandé

No Description détaillée Fabricant
RHD5900 Quad Operational Amplifier Aeroflex Circuit Technology
Aeroflex Circuit Technology
RHD5901 Quad Operational Amplifier Cobham Semiconductor
Cobham Semiconductor
RHD5901 Quad Operational Amplifier Aeroflex Circuit Technology
Aeroflex Circuit Technology
RHD5902 Quad Operational Amplifier Cobham Semiconductor
Cobham Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche