|
|
PDF PE613050 Data sheet ( Hoja de datos )
| Número de pieza | PE613050 | |
| Descripción | SP4T Tuning Control Switch | |
| Fabricantes | Peregrine Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PE613050 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
Product Description
The PE613050 is an SP4T tuning control switch based
on Peregrine’s UltraCMOS® technology. This highly
versatile switch supports a wide variety of tuning circuit
topologies with emphasis on impedance matching and
aperture tuning applications. PE613050 features low on-
resistance and insertion loss across key cellular
frequency bands from 100 to 3000 MHz.
PE613050 offers high RF power handling and
ruggedness, while meeting challenging harmonic and
linearity requirements enabled by Peregrine’s HaRP™
technology. With two-pin low voltage CMOS control, all
decoding and biasing is integrated on-chip and no
external bypassing or filtering components are required.
UltraCMOS tuning devices feature ease of use while
delivering superior RF performance. With built-in bias
voltage generation and ESD protection, tuning control
switches provide a monolithically integrated tuning
solution for demanding RF applications.
Figure 1. Functional Diagram
Product Specification
PE613050
UltraCMOS® SP4T Tuning Control
Switch, 100–3000 MHz
Features
Open reflective architecture
Low on-resistance of 1.6Ω
Low insertion loss
0.25 dB @ 900 MHz
0.40 dB @ 2200 MHz
High power handling
38.6 dBm @ 900 MHz
37.6 dBm @ 2200 MHz
Wide power supply range (2.3V to 5.5V)
High ESD tolerance of 2 kV HBM
on all pins
Applications include
Tunable antennas
Tunable matching networks
Bypassing applications
RFID readers
Figure 2. Package Type
12-lead 2 2 0.5 mm QFN
DOC-32614-4 │ www.psemi.com
DOC–62867
©2013–2014 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 8
1 page  
PE613050
Product Specification
Evaluation Board
The SP4T switch Evaluation Board was designed
to ease customer evaluation of Peregrine’s
PE613050. The RF common port is connected
through a 50Ω transmission line via the top SMA
connector, J1. RF1, RF2, RF3 and RF4 are
connected through 50Ω transmission lines via SMA
connectors J3, J5, J2 and J4, respectively. A
through 50Ω transmission is available via SMA
connectors J6 and J7. This transmission line can
be used to estimate the loss of the PCB over the
environmental conditions being evaluated.
The board consists of a 4 layer stack with 2 outer
layers made of Rogers 4350B (εr = 3.48) and 2
inner layers of FR4 (εr = 4.80). The total thickness
of this board is 62 mils (1.57 mm). The inner layers
provide a ground plane for the transmission lines.
Each transmission line is designed using a
coplanar waveguide with ground plane (CPWG)
model using a trace width of 32 mils (0.813 mm),
gap of 15 mils (0.381 mm), and a metal thickness
of 1.4 mils (0.051 mm).
Figure 5. Evaluation Board Layout
PRT-28405
DOC-32614-4 │ www.psemi.com
©2013–2014 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 8
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet PE613050.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PE613050 | SP4T Tuning Control Switch | Peregrine Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |