|
|
PDF MAUC-011009 Data sheet ( Hoja de datos )
| Número de pieza | MAUC-011009 | |
| Descripción | Up Converter | |
| Fabricantes | MA-COM | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAUC-011009 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
MAUC-011009
Up Converter
37 - 40 GHz
Features
Integrates Image Reject (Balanced) Mixer,
LO Buffer, LO Quadrupler and RF Buffer
13 dB Conversion Gain
+20 dBm Input Third Order Intercept (IIP3)
-30 dBm (4x) LO Leakage (@ RF Port)
18 dBc Image Rejection
Variable Gain with Adjustable Bias
Lead-Free 4 mm, 24 Lead QFN Package
RoHS^ Compliant
Description
The MAUC-011009 is an integrated up-converter
that has a typical conversion gain of 13 dB, and an
image rejection of 18 dBc. The device includes a
LO quadrupler, LO buffer amplifier, and RF buffer
amplifier. Variable gain can be achieved by
adjusting the bias, with turn-down trajectories
optimized to maintain linearity and 4LO leakage
over the gain control range. The output IP3 is
32 dBm at maximum gain.
The MAUC-011009 is ideally suited for 38 GHz band
point-to-point radios under both LSB and USB
operation.
Each device is 100% RF tested to ensure
performance compliance.
Ordering Information1,2
Part Number
MAUC-011009-TR0500
MAUC-011009-000SMB
Package
500 Piece Reel
Sample Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 3 loose parts.
Rev. V1
Functional Schematic
GND N/C GND GND RF GND
24 23 22 21 20 19
N/C 1
18 VD2
I* 2
17 VG2
I3
16 VD1
Q* 4
Q5
N/C 6
15 VG1
14 VG4
X4 13 VD3
7 8 9 10 11 12
GND LO GND GND VG3 GND
Pin Configuration3
Pin No.
Function
Pin No.
Function
1 N/C 13 VD3
2 I* 14 VG4
3 I 15 VG1
4 Q* 16 VD1
5 Q 17 VG2
6 N/C 18 VD2
7 GND 19 GND
8 LO 20 RF
9 GND 21 GND
10 GND
22 GND
11 VG3
23 N/C
12 GND
24 GND
25 Paddle4
3. MACOM recommends connecting all N/C (no connection)
package pins to ground.
4. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
^ Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
1 page  
MAUC-011009
Up Converter
37 - 40 GHz
Typical Performance Curves: LO = 0 dBm, IF = -10 dBm @ 2 GHz, PDC = 1.52 W
Input IP3
Input IP3, LO Power swept
25 25
Rev. V1
20 20
15 15
10
5
0
37.0
37.5
LSB @ +25°C
LSB @ -40°C
LSB @ +85°C
USB @ +25°C
USB @ -40°C
USB @ +85°C
38.0 38.5 39.0
Frequency (GHz)
39.5
40.0
Input IP3 @ 37 GHz
25
10
5
0
37.0
37.5
LSB @ PLO = 0 dBm
LSB @ PLO = 4 dBm
LSB @ PLO = 8 dBm
USB @ PLO = 0 dBm
USB @ PLO = 4 dBm
USB @ PLO = 8 dBm
38.0
38.5
39.0
39.5
40.0
Frequency (GHz)
Input IP3 @ 40 GHz
25
20 20
15 15
10
LSB @ -40°C
LSB @ +85°C
5 USB @ -40°C
USB @ +85°C
0
0 50 100 150 200 250 300
ID1+ID2 (mA)
Input IP3, IF = 21.4 MHz
25
10
LSB @ -40°C
LSB @ +85°C
5 USB @ -40°C
USB @ +85°C
0
0 50 100 150 200 250 300
ID1+ID2 (mA)
Input IP3, IF = 3.5 GHz
25
20 20
15 15
10 10
LSB
5 5 USB
0
37.0
37.5
38.0
38.5
39.0
39.5
40.0
Frequency (GHz)
5
0
37.0
37.5
38.0
38.5
39.0
39.5
40.0
Frequency (GHz)
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
5 Page 
MAUC-011009
Up Converter
37 - 40 GHz
Rev. V1
App Note [1] Biasing
MAUC-011009 is operated by biasing VD1, VD2 and VD3 at 4.0 V. The corresponding drain currents are set to
45 mA, 135 mA and 200 mA respectively. VG4 requires a fixed voltage bias of nominally -3.25 V. It is
recommended to use active bias on VG1, VG2, VG3 to keep the currents in VD1, VD2 and VD3 constant, in order to
maintain the best performance over temperature. Depending on the supply voltages available and the power
dissipation constraints, the bias circuits may include a single transistor or a low power operational amplifier, with a
low value resistor in series with the drain supply to sense the current. Make sure to sequence the applied voltage
to ensure negative gate bias is available before applying the positive drain supply.
App Note [2] IF Inputs
The IF input to the typical configuration is through a 90° hybrid coupler. The hybrid splits the IF input into inphase
and quadrature phase components which feed into two 180° hybrid couplers splitting into 4 signals. These four
signals enter the MAUC-011009 on I/I*,Q/Q* IF inputs through bias tees. For highest gain, best image rejection
and highest OIP3, all the 4 IF inputs should be used. See App Note [4] for IF bias.
IF In-
I Bias
I* Bias
Q Bias
Q* Bias
GND N/C GND GND RF GND
24 23 22 21 20 19
N/C 1
18 VD2
I* 2
17 VG2
I3
16 VD1
Q* 4
Q5
15 VG1
14 VG4
N/C 6
X4 13 VD3
7 8 9 10 11 12
GND LO GND GND VG3 GND
11
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet MAUC-011009.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAUC-011003 | Up Converter | MA-COM |
| MAUC-011009 | Up Converter | MA-COM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |