DataSheetWiki


GS2964 fiches techniques PDF

Gennum - Adaptive Cable Equalizer

Numéro de référence GS2964
Description Adaptive Cable Equalizer
Fabricant Gennum 
Logo Gennum 





1 Page

No Preview Available !





GS2964 fiche technique
GS2964 Adaptive Cable Equalizer
Key Features
• SMPTE 424M, SMPTE 292M and SMPTE 259M
compliant
• Automatic cable equalization
• Multi-standard operation from 143Mb/s to 2.97Gb/s
• Performance optimized for 270Mb/s, 1.485Gb/s and
2.97Gb/s. Typical equalized length of Belden 1694A
cable:
Š 100m at 2.97Gb/s
Š 140m at 1.485Gb/s
Š 180m at 270Mb/s
• Supports DVB-ASI at 270Mb/s
• Manual bypass (useful for low data rates with slow
rise/fall times)
• Programmable carrier detect with squelch threshold
adjustment
• Standard EIA/JEDEC logic control and status signal
levels
• Single 3.3V power supply operation
• 215mW power consumption (typical)
• Wide temperature range of -40ºC to +85ºC
• Small footprint QFN package (4mm x 4mm)
Š Drop-in compatible with the GS2974
• Pb-free and RoHS compliant
Applications
• SMPTE 424M, SMPTE 292M and SMPTE 259M coaxial
cable serial digital interfaces
Description
The GS2964 is a high-speed BiCMOS integrated circuit
designed to equalize and restore signals received over 75Ω
coaxial cable.
The device is designed to support SMPTE 424M,
SMPTE292M and SMPTE 259M, and is optimized for
performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s.
The GS2964 features DC restoration to compensate for the
DC content of SMPTE pathological test patterns.
The Carrier Detect output pin (CD) indicates whether a
valid input signal has been detected. It can be connected
directly to the MUTE pin to mute the output on loss of
carrier. A voltage programmable threshold, which can be
changed via the SQ_ADJ pin, forces CD high when the
input signal amplitude falls below the threshold. This
allows the GS2964 to distinguish between low-amplitude
SDI signals and noise at the input of the device.
The equalizing and DC restore stages are disengaged when
the BYPASS pin is HIGH. No equalization occurs in Bypass
mode.
The differential outputs can be DC-coupled to Gennum
3.3V cable drivers and reclockers and to other
industry-standard 3.3V CML logic.
The GS2964 is footprint and drop-in compatible with
existing GS2974 designs, with no additional application
changes required.
The device is available in a 16-pin, 4mm x 4mm QFN
package.
Power consumption of the GS2964 is typically 215mW.
The GS2964 is Pb-free, and the encapsulation compound
does not contain halogenated flame retardant.
This component and all homogeneous subcomponents are
RoHS compliant.
GS2964 Adaptive Cable Equalizer
Data Sheet
51913 - 3
March 2010
www.gennum.com
1 of 17

PagesPages 17
Télécharger [ GS2964 ]


Fiche technique recommandé

No Description détaillée Fabricant
GS2960A HD SD SDI Receiver Semtech
Semtech
GS2961 Receiver Gennum
Gennum
GS2961A HD SD SDI Receiver Semtech
Semtech
GS2962 3G/HD/SD-SDI Serializer GENNUM
GENNUM

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche