|
|
PDF MA4PBL027 Data sheet ( Hoja de datos )
| Número de pieza | MA4PBL027 | |
| Descripción | HMIC Silicon Beam Lead PIN Diode | |
| Fabricantes | MA-COM | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MA4PBL027 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
MA4PBL027
HMIC Silicon Beam Lead PIN Diode
Features
• No Wirebonds Required
• Rugged Silicon-Glass Construction
• Silicon Nitride Passivation
• Polymer Scratch and Impact Protection
• Low Parasitic Capacitance and Inductance
• Ultra Low Capacitance < 40 fF
• Excellent RC Product < 0.10 ps
• High Switching Cutoff Frequency > 110 GHz
• 110 Nanosecond Minority Carrier Lifetime
• Driven by Standard +5 V TTL PIN Diode Driver
Description
The MA4PBL027 is a silicon beam lead PIN diode
fabricated with MACOM’s HMIC™ process. It
features one silicon pedestal embedded in a low
loss, low dispersion glass which supports the
beam-leads. The diode is formed on the top of the
pedestal, and air-bridges connect the diode to the
beam-leads. The topside is fully encapsulated with
silicon nitride and also has an additional polymer
layer for scratch and impact protection. These
protective coatings prevent damage to the diode
junction and air-bridge during handling and
assembly. The diodes exhibit low series resistance,
low capacitance, and extremely fast switching speed.
Applications
The ultra low capacitance, low RC product and low
profile of the MA4PBL027 makes it an ideal choice
for use in microwave and millimeter wave switch
designs, where low insertion loss and high isolation
are required. The low bias levels of 10 mA in the low
loss state and 0 V in the isolation state allows the
use of a simple 5 V TTL gate driver. These diodes
can be used as switching arrays on radar systems,
high speed ECM circuits, optical switching networks,
instrumentation, and other wideband multi-throw
switch assemblies.
Rev. V3
Outline Drawing and Dimensions
INCHES
MM
DIM
MIN.
MAX.
MIN.
MAX.
A
0.033
0.035
0.838
0.889
B
0.0148 0.0164 0.376
0.416
C
0.004
0.006 0.1016 0.1524
D
0.0115 0.0135 0.2921
0.343
E
0.0048 0.0065 0.1220
0.165
F
0.0082 0.010
0.208
0.254
Ordering Information
Part Number
MA4PBL027
Package
100 piece Gel Pack1
1. Parts packed circuit side down.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet MA4PBL027.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MA4PBL027 | HMICTM Silicon Beam-Lead PIN Diodes |  Tyco Electronics |
| MA4PBL027 | HMIC Silicon Beam Lead PIN Diode | MA-COM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |