|
|
PDF TLP665L Data sheet ( Hoja de datos )
| Número de pieza | TLP665L | |
| Descripción | Photocouplers GaAs Infrared LED & Photo Triac | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TLP665L (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
Photocouplers GaAs Infrared LED & Photo Triac
TLP665L,TLP665LF
TLP665L,TLP665LF
1. Applications
• Solid-State Relays
• Triac Drivers
• Home Electric Appliances
• Office Equipment
2. General
The TLP665L consists of a non zero crossing photo triac, optically coupled to a gallium arsenide infrared emitting
diode. The TLP665L is housed in the DIP6 package and guarantees insulation thickness of 0.5 mm (min).
Therefore, the TLP665L meets the reinforced insulation class requirements of international safety standards.
3. Features
(1) Peak off-state voltage: 800 V (min)
(2) Non zero crossing functionary (NZC)
(3) Trigger LED current: 10 mA (max)
(4) On-state current: 100 mA (max)
(5) Isolation voltage: 5000 Vrms (min)
(6) Safety standards
UL-approved: UL1577 File No.E67349
cUL-approved: CSA Component Acceptance Service No.5A File No.E67349
CQC-approved: GB4943.1, GB8898
VDE-approved: Option (D4) EN60747-5-5 (Note)
Maximum operating insulation voltage: 890 Vpeak / 1140 Vpeak (Note1)
Highest permissible overvoltage: 8000 Vpeak
Note: When an EN60747-5-5 approved type is needed, please designate the Option (D4).
Note1: When maximum operating insulation voltage 1140 Vpeak is needed, please designate the TLP665LF.
Table 3.1 Mechanical Parameters
Characteristics
Creepage distances
Clearance distances
Internal isolation thickness
7.62 mm Pitch
TLP665L
7.0 (min)
7.0 (min)
0.5 (min)
10.16 mm Pitch
TLP665LF
8.0 (min)
8.0 (min)
0.5 (min)
Unit
mm
Table 3.2 Trigger LED Current (Note) (Unless otherwise specified, Ta = 25 )
Rank
IFT Rank
Marking
Test Condition
Trigger LED Current IFT Trigger LED Current IFT
(min)
(max)
None
(IFT7)
None
7
VT = 6 V
VT = 6 V
10
7
Note:
Specify both the part number and a rank in this format when ordering.
Example: TLP665L (IFT7)
For safety standard certification, however, specify the part number alone.
Example: TLP665L
Unit
mA
Start of commercial production
2014-11
1 2014-11-07
Rev.1.0
1 page  
TLP665L,TLP665LF
9. Electrical Characteristics (Unless otherwise specified, Ta = 25 )
Characteristics
LED Input forward voltage
Input reverse current
Input capacitance
Detector Peak off-state current
Peak on-state voltage
Holding current
Critical rate of rise of off-state
voltage
Critical rate of rise of
commutating voltage (dv/dt)
Symbol
VF
IR
Ct
IDRM
VTM
IH
dv/dt
dv/dt(c)
Note
Test Condition
IF = 10 mA
VR = 5 V
V = 0 V, f = 1 MHz
VDRM = 800 V
ITM = 100 mA
Vin = 240 V, Ta = 85
See Fig. 9.1
Vin = 60 Vrms, IT = 15 mA
See Fig. 9.1
Min Typ. Max Unit
1.0 1.15 1.3
V
10 µA
30 pF
10 1000 nA
1.7 3.0 V
1.0 mA
500 V/µs
0.2
Fig. 9.1 dv/dt Test Circuit
10. Coupled Electrical Characteristics (Unless otherwise specified, Ta = 25 )
Characteristics
Trigger LED current
Symbol
IFT
Note
VT = 6 V
Test Condition
Min Typ. Max Unit
10 mA
11. Isolation Characteristics (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol Note
Test Condition
Min Typ. Max Unit
Total capacitance (input to
output)
Isolation resistance
Isolation voltage
CS (Note 1) VS = 0 V, f = 1 MHz
RS (Note 1) VS = 500 V, R.H. ≤ 60%
BVS (Note 1) AC, 60 s
AC, 1 s in oil
DC, 60 s in oil
0.8
5 × 1010
5000
1014
10000
10000
pF
Ω
Vrms
Vdc
Note 1: This device is considered as a two-terminal device: Pins 1, 2 and 3 are shorted together, and pins 4 and 6 are
shorted together.
5 2014-11-07
Rev.1.0
5 Page 
TLP665L,TLP665LF
Table 16.1 Insulation Related Specifications (Note)
Insulation Related Parameters
Symbol
TLP665L
TLP665LF
Minimum creepage distance
Minimum clearance
Minimum insulation thickness
Comparative tracking index
Cr 7.0 mm
Cl 7.0 mm
ti 0.5 mm
CTI 175
8.0 mm
8.0 mm
0.5 mm
175
Note:
Note:
If a printed circuit is incorporated, the creepage distance and clearance may be reduced below this value. (e.
g., at a standard distance between soldering eye centers of 3.5 mm). If this is not permissible, the user shall
take suitable measures.
This photocoupler is suitable for safe electrical isolation only within the safety limit data.
Maintenance of the safety data shall be ensured by means of protective circuits.
Fig. 16.2 Marking on packing
for EN60747
Fig. 16.3 Marking Example of TLP665L (Note) Fig. 16.4 Marking Example of TLP665LF (Note)
Note: The above marking is applied to the photocouplers that have been qualified according to option (D4) of EN60747.
11 2014-11-07
Rev.1.0
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet TLP665L.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TLP665J | GaAs IRED & PHOTO-TRIAC | Toshiba Semiconductor |
| TLP665JF | TOSHIBA Photocoupler GaAs Ired & Photo−Triac | Toshiba Semiconductor |
| TLP665JS | GaAs IRED & PHOTO-TRIAC | Toshiba Semiconductor |
| TLP665L | Photocouplers GaAs Infrared LED & Photo Triac | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |