DataSheet.es    


PDF LC87FBL08A Data sheet ( Hoja de datos )

Número de pieza LC87FBL08A
Descripción 8-bit 1-chip Microcontroller
Fabricantes ON Semiconductor 
Logotipo ON Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de LC87FBL08A (archivo pdf) en la parte inferior de esta página.


Total 28 Páginas

No Preview Available ! LC87FBL08A Hoja de datos, Descripción, Manual

Ordering number : ENA1955
LC87FBL08A
CMOS IC
8K-byte FROM and 256-byte RAM integrated
8-bit 1-chip Microcontroller
http://onsemi.com
Overview
The LC87FBL08A is an 8-bit microcomputer that, centered around a CPU running at a minimum bus cycle time of
83.3ns, integrates on a single chip a number of hardware features such as 8K-byte flash ROM (On-board-
programmable), 256-byte RAM, an On-chip-debugger, sophisticated 16-bit timers/counters (may be divided into 8-bit
timers), a 16-bit timer/counter (may be divided into 8-bit timers/counters or 8-bit PWMs), two 8-bit timers with a
prescaler, a base timer serving as a time-of-day clock, an asynchronous/synchronous SIO interface, two 12-bit PWM
channels, a 12-bit/8-bit 11-channel AD converter, a system clock frequency divider, an internal reset and a 17-source
9-vector interrupt feature.
Features
Flash ROM
Capable of On-board programming with wide range (2.7 to 5.5V) of voltage source.
Block-erasable in 128 byte units
Writable in 2-byte units
8192 × 8 bits
RAM
256 × 9 bits
Minimum Bus Cycle
83.3ns (12MHz at VDD=2.7V to 5.5V)
Note: The bus cycle time here refers to the ROM read speed.
* This product is licensed from Silicon Storage Technology, Inc. (USA).
Semiconductor Components Industries, LLC, 2013
May, 2013
Ver.1.00
52511HKIM 20110419-S00003 No.A1955-1/28

1 page




LC87FBL08A pdf
LC87FBL08A
Flash ROM Programming Boards
Package
Programming boards
QFP36
W87F24Q
VQLP32
(build-to-order )
Flash ROM Programmer
Maker
Flash Support Group, Inc.
(FSG)
Single
Programmer
Gang
Programmer
Flash Support Group, Inc.
(FSG)
+
Our company
In-circuit
Programmer
(Note 1)
Single/Gang
Our company
Programmer
In-circuit/Gang
Programmer
For information about AF-Series:
Flash Support Group, Inc.
TEL: +81-53-459-1050
Model
AF9709/AF9709B/AF9709C
(Including Ando Electric Co., Ltd. models)
AF9723/AF9723B(Main body)
(Including Ando Electric Co., Ltd. models)
AF9833(Unit)
(Including Ando Electric Co., Ltd. models)
AF9101/AF9103(Main body)
(FSG models)
SIB87(Inter Face Driver)
(Our company model)
SKK / SKK Type B / SKK Type C
(SanyoFWS)
SKK-DBG Type B / SKK-DBG Type C
(SanyoFWS)
Supported version
Rev 03.28 or later
-
-
(Note 2)
Application Version
1.06 or later
Chip Data Version
2.34 or later
Device
87F008SU
-
-
-
LC87FBL08
Note1: On-board-programmer from FSG (AF9101/AF9103) and serial interface driver from Our company (SIB87)
together
can give a PC-less, standalone on-board-programming capabilities.
Note2: It needs a special programming devices and applications depending on the use of programming environment.
Please ask FSG or Our company for the information.
No.A1955-5/28

5 Page





LC87FBL08A arduino
LC87FBL08A
Continued from preceding page.
Pin Name
I/O
Description
Port 7
P70 to P73
I/O 4-bit I/O port
I/O specifiable in 1 bit units
Pull-up resistors can be turned on and off in 1 bit units.
Pin functions
P70: INT0 input / HOLD reset input / timer 0L capture input
P71: INT1 input / HOLD reset input / timer 0H capture input
P72: INT2 input / HOLD reset input / timer 0 event input / timer 0L capture input
P73: INT3 input (with noise filter) / timer 0 event input / timer 0H capture input
P70(AN8) to P73(AN11): AD converter input
Interrupt acknowledge types
Rising
Falling
Rising &
Falling
H level
INT0
INT1
INT2
enable
enable
enable
enable
enable
enable
disable
disable
enable
enable
enable
disable
INT3
enable
enable
enable
disable
L level
enable
enable
disable
disable
RES
CF1/XT1
CF2/XT2
I/O External reset input / internal reset output
I Ceramic resonator or 32.768kHz crystal oscillator input pin
Pin function
General-purpose input port
I/O Ceramic resonator or 32.768kHz crystal oscillator output pin
Pin function
General-purpose I/O port
Option
No
No
No
No
Port Output Types
The table below lists the types of port outputs and the presence/absence of a pull-up resistor.
Data can be read into any input port even if it is in the output mode.
Port Name
P00 to P07
Option selected in
units of
1 bit
Option type
1
CMOS
Output type
Pull-up resistor
Programmable (Note 1)
2 Nch-open drain
No
P10 to P17 1 bit 1 CMOS
Programmable
2 Nch-open drain
Programmable
P20 to P21 1 bit 1 CMOS
Programmable
2 Nch-open drain
Programmable
P30 to P31 1 bit 1 CMOS
Programmable
2 Nch-open drain
Programmable
P70 - No Nch-open drain
Programmable
P71 to P73
- No CMOS
Programmable
CF2/XT2
-
No
Ceramic resonator/32.768kHz crystal resonator
No
output Nch-open drain
(N-channel open drain when set to general-purpose
output port)
Note 1: The control of the presence or absence of the programmable pull-up resistors for port 0 and the switching
between low-and high-impedance pull-up connection is exercised in nibble (4-bit) units (P00 to 03 or
P04 to 07).
No.A1955-11/28

11 Page







PáginasTotal 28 Páginas
PDF Descargar[ Datasheet LC87FBL08A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LC87FBL08A8-bit 1-chip MicrocontrollerSanyo Semicon Device
Sanyo Semicon Device
LC87FBL08A8-bit 1-chip MicrocontrollerON Semiconductor
ON Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar