DataSheetWiki


LB1846MC fiches techniques PDF

ON Semiconductor - Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver

Numéro de référence LB1846MC
Description Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





LB1846MC fiche technique
Ordering number : ENA2016
LB1846MC
Monolithic Digital IC
Low-Voltage/Low Saturation Voltage Type
Bidirectional Motor Driver
http://onsemi.com
Overview
The LB1846MC is 2-channel low-voltage, low saturation voltage type bidirectional motor driver IC that is optimal for
use as 2-phase stepping motor drivers in printers, cameras and other portable equipment. The output circuits are of the
bipolar type, with PNP transistors in the upper side and NPN transistors in the lower side, and they achieve low
saturation output and low power characteristics despite being provided in a miniature package.
The LB1846MC products can directly control a motor from signals from a microcontroller. The LB1846MC is optimal
for 1-2 phase excitation drive for 2-phase stepping motors using 4-input logic (IN1, IN2, IN3 and IN4).
Another point is that these IC include built-in thermal shutdown circuits so that IC scorching or burning is prevented in
advance even if the IC output is shorted.
Functions
Optimal for 1-2 phase excitation drive for 2-phase stepping motors
Standby current: Zero
Low saturation voltage. VO (sat) = 0.55V typical at IO = 400mA
Thermal shutdown circuit
No limitations on the magnitude relationship between the power supply voltage (VCC) and the input voltage (VIN)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Output voltage
Input voltage
Ground pin outflow current
Allowable power dissipation
Symbol
VCC max
VOUT
VIN
IGND
Pd max
Conditions
Per channel
When mounted*
Ratings
-0.3 to +8.0
VCC + VSF
-0.3 to +8.0
800
870
Unit
V
V
V
mA
mW
Operating temperature
Topr
-20 to +75
°C
Storage temperature
Tstg
-40 to +150
°C
*1: When mounted on the specified printed circuit board (114.3mm × 76.2mm × 1.5mm), glass epoxy board
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current,
high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
June, 2013
30712 SY 20120112-S00002 No.A2016-1/4

PagesPages 4
Télécharger [ LB1846MC ]


Fiche technique recommandé

No Description détaillée Fabricant
LB1846M Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver Sanyo
Sanyo
LB1846MC Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche