DataSheetWiki


A1642 fiches techniques PDF

Allegro - Two-Wire True Zero-Speed Miniature Differential Peak-Detecting Sensor IC

Numéro de référence A1642
Description Two-Wire True Zero-Speed Miniature Differential Peak-Detecting Sensor IC
Fabricant Allegro 
Logo Allegro 





1 Page

No Preview Available !





A1642 fiche technique
A1642
Two-Wire True Zero-Speed Miniature Differential
Peak-Detecting Sensor IC with Continuous Calibration
Features and Benefits
Running mode calibration for continuous optimization
Single chip IC for high reliability
Internal current regulator for 2-wire operation
Precise duty cycle signal over operating temperature range
Large operating air gaps
Automatic Gain Control (AGC) for air gap independent
switchpoints
Automatic Offset Adjustment (AOA) for signal processing
optimization
True zero-speed operation
Undervoltage lockout
Wide operating voltage range
Wide-lead package suitable for welding external
components directly to the package leads or for welding
the device to a leadframe.
Package: 4-pin SIP (Suffix KN)
Not to scale
Description
The A1642 is an optimized Hall effect sensing integrated
circuit that provides a user-friendly solution for true zero-speed
digital ring-magnet sensing in two-wire applications.This small
package can be easily assembled and used in conjunction with
a wide variety of target shapes and sizes.
The integrated circuit incorporates dual Hall effect elements
and signal processing that switches in response to differential
magnetic signals created by ring magnet poles. The circuitry
contains a sophisticated digital circuit to reduce system offsets,
to calibrate the gain for air-gap–independent switchpoints,
and to achieve true zero-speed operation. Signal optimization
occurs at power-on through the combination of offset and
gain adjust and is maintained throughout the operating time
with the use of a running-mode calibration. The running-mode
calibration allows immunity to environmental effects such as
micro-oscillations of the target or sudden air gap changes.
The regulated current output is configured for two-wire
applications and the A1642 is ideally suited for obtaining
speed and duty cycle information in ABS (antilock braking
systems). The 1.5 mm spacing between the dual Hall elements
is optimized for fine pitch ring-magnet–based configurations.
For applications requiring sensing of rotating ferrous gears and
targets, refer to theAllegroATS series of products. The package
is lead (Pb) free, with 100% matte tin leadframe plating.
Hall
Amplifier
Functional Block Diagram
Gain
VCC
Automatic Offset
Control
AOA DAC
Tracking
DAC
Peak Hold
AGC DAC
Gain Control
A1642LKN-DS, Rev. 4
Internal Regulator
Test Signals
GND
Test

PagesPages 14
Télécharger [ A1642 ]


Fiche technique recommandé

No Description détaillée Fabricant
A1641 PNP Transistor - 2SA1641 Sanyo Semicon Device
Sanyo Semicon Device
A1642 Two-Wire True Zero-Speed Miniature Differential Peak-Detecting Sensor IC Allegro
Allegro
A1642LK Two-Wire True Zero-Speed Miniature Differential Peak-Detecting Sensor Allegro MicroSystems
Allegro MicroSystems
A1643 PNP Transistor - 2SA1643 SavantIC
SavantIC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche