DataSheetWiki


A1569K fiches techniques PDF

Allegro - Automotive LED Driver

Numéro de référence A1569K
Description Automotive LED Driver
Fabricant Allegro 
Logo Allegro 





1 Page

No Preview Available !





A1569K fiche technique
A1569K
Automotive LED Driver with
Integrated Hall-Effect Switch
FEATURES AND BENEFITS
Linear LED drive current ≤150 mA set by an external
reference resistor
• High sensitivity, omnipolar Hall-effect switch for LED
on/off control
• Low component count for small size and ease of design
• Elegant fade-in/fade-out effects with adjustable duration
(optional)
• Qualified per AEC-Q100 for automotive applications
• Low dropout voltage and low supply current
• Chopper-stabilized Hall switch
□Low switchpoint drift over temperature
□Insensitivity to physical stress
• Input pin for external LED driver control
• Slew-rate-limited LED output drive for current transient
suppression
• Ruggedness and reliability
□Integrated voltage regulator for operation from 7 to 24 V
□Reverse-battery protection
□Automatic short-circuit and thermal overload
protection and recovery
□–40ºC to 125ºC ambient temperature range
• Small 8-pin SOIC package with thermal pad
PACKAGE:
8-Pin SOICN with Exposed Thermal Pad (Suffix LJ)
Not to scale
DESCRIPTION
The A1569K is a highly integrated solution that combines a
Hall-effect switch with a linear, programmable current regulator,
providing up to 150 mA to drive one or more LEDs. With the
addition of only two passive components and one or more
LEDs, the A1569K forms a complete, magnetically actuated
lighting solution that is small, flexible, elegant, easy to design,
rugged, and reliable. It is optimized for automotive interior and
auxilliary lighting such as map lights, glove boxes, consoles,
vanity mirrors, hood/truck/bed lights, etc.
The LED drive current is set by an external resistor; the LED is
then activated by the built-in Hall-effect switch and features an
adjustable fade-in/fade-out effect. Omnipolar operation (either
north or south pole) and high magnetic sensitivity make the
A1569K tolerant of large air gaps and mechanical misalignment.
System assembly is easier, as the magnet can be oriented with
either pole facing the device. Chopper stabilization provides
low switchpoint drift over the operating temperature range.
The driver can also be activated via an external input for direct
control of the LED.
In addition to contactless operation and safe, constant-current
LED drive, reliability is further enhanced with reverse-battery
protection, thermal foldback, and automatic shutdown for
thermal overload and shorts to ground.TheA1569K will prevent
damage to the system by removing LED drive current until
the short is removed and/or the chip temperature has reduced
below the thermal threshold. The driver output is slew-rate-
limited to reduce electrical noise during operation.
Continued on the next page…
For standalone operation,
SEN_EN is pulled high
(e.g., tied to VIN)
+V
CBYPASS
Optional
Control Signals
From MCU or
Remote Switch
SLEEP
LED_ON
VIN
SEN_EN
EXT HALL
LA
RIREF
IREF
No Connect
or THTH
Connect to GND
FADE
GND
150 mA
CFADE
(optional)
A1569K-DS
Typical Application Diagram

PagesPages 21
Télécharger [ A1569K ]


Fiche technique recommandé

No Description détaillée Fabricant
A1569 Flash Media Player Avid Electronics
Avid Electronics
A1569E LED Driver Allegro
Allegro
A1569K Automotive LED Driver Allegro
Allegro

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche