DataSheetWiki


A1340 fiches techniques PDF

Allegro - High Precision Programmable Linear Hall Effect Sensor IC

Numéro de référence A1340
Description High Precision Programmable Linear Hall Effect Sensor IC
Fabricant Allegro 
Logo Allegro 





1 Page

No Preview Available !





A1340 fiche technique
A1340
High Precision Programmable Linear Hall Effect Sensor IC
with EEPROM, Analog Output, and Advanced Output Linearization
FEATURES AND BENEFITS
• Advanced 32-segment output linearization functionality
enables high output accuracy and linearity in the
presence of non-linear input magnetic fields
• Customer adjustable sensitivity and offset, bandwidth,
output clamps, and 1st and 2nd order temperature
compensation
• Simultaneous programming of all parameters for accurate
and efficient system optimization
• Factory trimmed magnetic input range (coarse sensitivity)
and signal offset
• Sensitivity temperature coefficient and magnetic offset drift
preset at Allegro, for maximum device accuracy without
requiring customer temperature testing
• Temperature-stable, mechanical stress immune, and
extremely low noise device output via proprietary
four-phase chopper stabilization and differential circuit
design techniques
• Diagnostics for open circuit and undervoltage
• Wide ambient temperature range: –40°C to 150°C
• Operates with 4.5 to 5.5 V supply voltage
Package: 4-pin SIP (suffix KT)
1 mm case thickness
DESCRIPTION
The A1340 device is a high precision, programmable Hall
effect linear sensor integrated circuit (IC) for both automotive
and non-automotive applications. The signal path of theA1340
provides flexibility through external programming that allows
the generation of an accurate, and customized output voltage
from an input magnetic signal. The A1340 provides 12 bits of
output resolution, and supports a maximum bandwidth of 3 kHz.
The BiCMOS, monolithic integrated circuit incorporates a
Hall sensor element, precision temperature-compensating
circuitry to reduce the intrinsic sensitivity and offset drift of the
Hall element, a small-signal high-gain amplifier, proprietary
dynamic offset cancellation circuits, and advanced output
linearization circuitry.
With on-board EEPROM and advanced signal processing
functions, theA1340 provides an unmatched level of customer
reprogrammable options for characteristics such as gain and
offset, bandwidth, and output clamps. Multiple input magnetic
range and signal offset choices can be preset at the factory. In
addition, the device supports separate hot and cold, 1st and 2nd
order temperature compensation.
A key feature of the A1340 is its ability to produce a highly
linear device output for nonlinear input magnetic fields.
To achieve this, the device divides the output into 32 equal
segments and applies a unique linearization coefficient factor
to each segment. Linearization coefficients are stored in a
look-up table in EEPROM.
The A1340 sensor is available in a lead (Pb) free 4-pin single
in-line package (KT suffix), with 100% matte tin leadframe
plating.
Not to scale
Analog Subsystem
...00110011...
Digital Signal Processing
Output Stage
Magnetic
Signal
12-bit
12-bit
Hall
Element
Factory Preset
Magnetic Range
and
Signal Offset
A to D
Conversion
Bandwidth
and
Temperature
Compensation
Sensitivity
and
Fine Offset
Adjustment
Linearization
Clamps
D to A
Output
Conversion Driver
Figure 1: A1340 Signal Processing Path.
Functions with programmable parameters indicated by double-headed arrows.
A1340-DS, Rev. 2
Output
Voltage

PagesPages 30
Télécharger [ A1340 ]


Fiche technique recommandé

No Description détaillée Fabricant
A1340 High Precision Programmable Linear Hall Effect Sensor IC Allegro
Allegro
A13421P HA13421P Hitachi
Hitachi

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche