DataSheetWiki


A1193-F fiches techniques PDF

Allegro - Two-Wire Hall-Effect Switches

Numéro de référence A1193-F
Description Two-Wire Hall-Effect Switches
Fabricant Allegro 
Logo Allegro 





1 Page

No Preview Available !





A1193-F fiche technique
A119x and A119x-F
Programmable, Chopper-Stabilized, Two-Wire Hall-Effect Switches
FEATURES AND BENEFITS
▪ Choice of factory-set temperature coefficient (TC) for use
with ferrite or rare-earth magnets
▪ Field programmable for optimized switchpoints
▪ AEC-Q100 automotive qualified
▫ On-board voltage regulator: 3 to 24 V operation
▪ High-speed, 4-phase chopper stabilization
▫ Low switchpoint drift throughout temperature range
▫ Low sensitivity to thermal and mechanical stresses
▪ On-chip protection
▫ Supply transient protection
▫ Reverse-battery protection
▫ Industry-leading ISO 7637-2 performance through use of
proprietary, 40 V clamping structure
▪ Solid-state reliability
▪ Robust EMC and ESD performance
▪ UB package with integrated 0.1 µF bypass capacitor
Packages
3-pin SOT23-W
2 mm × 3 mm × 1
mm (suffix LH)
3-pin ultramini SIP
1.5 mm × 4 mm × 3
mm (suffix UA)
2-pin ultramini SIP
1.5 mm × 4 mm × 4
mm (suffix UB)
Not to scale
DESCRIPTION
The A119x and A119x-F comprise a family of two-wire,
unipolar, Hall-effect switches, which can be trimmed by the
user at end-of-line to optimize magnetic switchpoint accuracy
in the application. The latter (-F option) are temperature-
compensated for use with ferrite magnets. These devices are
produced on theAllegroadvanced BiCMOS wafer fabrication
process, which implements a patented high-frequency, 4-phase,
chopper stabilization technique. This technique achieves
magnetic stability over the full operating temperature range,
and eliminates offsets inherent in devices with a single Hall
element that are exposed to harsh application environments.
The A119x and A119x-F family has a number of automotive
applications. These include sensing seat track position, seat belt
buckle presence, hood/trunk latching, and shift selector position.
Two-wire unipolar switches are particularly advantageous in
cost-sensitive applications because they require one less wire
for operation versus the more traditional open-collector output
switches. Additionally, the system designer inherently gains
diagnostics because there is always output current flowing,
which should be in either of two narrow ranges. Any current
level not within these ranges indicates a fault condition.
All family members are offered in three package styles. The LH
is a SOT-23W style, miniature, low-profile package for surface-
mount applications. The UA is a 3-pin, ultra-mini, single inline
package (SIP) for through-hole mounting. The UB is a 2-pin single
inline package (SIP) for through-hole mounting that integrates
the power supply decoupling capacitor. All three packages are
lead (Pb) free, with 100% matte-tin leadframe plating.
UB package only
V+ VCC
LH & UA
package
only
0.01 µF
0.1 µF
Regulator
To all subcircuits
Clock/Logic
Program / Lock
Offset Adjust
ICC Adjust
Amp
Polarity
Low-Pass
Filter
Schmitt
Trigger
A1190-DS, Rev. 7
Functional Block Diagram
GND
UA package only
GND

PagesPages 22
Télécharger [ A1193-F ]


Fiche technique recommandé

No Description détaillée Fabricant
A1193-F Two-Wire Hall-Effect Switches Allegro
Allegro

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche