DataSheetWiki


FAN4802S fiches techniques PDF

Fairchild Semiconductor - PFC/PWM Controller Combination

Numéro de référence FAN4802S
Description PFC/PWM Controller Combination
Fabricant Fairchild Semiconductor 
Logo Fairchild Semiconductor 





1 Page

No Preview Available !





FAN4802S fiche technique
January 2014
FAN4800AS/CS/01S/2S
PFC/PWM Controller Combination
Features
Pin-to-Pin Compatible with ML4800 and FAN4800
and CM6800 and CM6800A
PWM Configurable for Current Mode or
Feedforward Voltage-Mode Operation
Internally Synchronized Leading-Edge PFC and
Trailing-Edge PWM in One IC
Low Operating Current
Innovative Switching-Charge Multiplier Divider
Average-Current Mode for Input-Current Shaping
PFC Over-Voltage and Under-Voltage Protections
PFC Feedback Open-Loop Protection
Cycle-by-Cycle Current Limiting for PFC/PWM
Power-on Sequence Control and Soft-Start
Brownout Protection
Interleaved PFC/PWM Switching
Improved Efficiency at Light Load
fRTCT=4•fPFC=4•fPWM for FAN4800AS/01S
fRTCT=4•fPFC=2•fPWM for FAN4800CS/02S
Applications
Desktop PC Power Supply
Internet Server Power Supply
LCD TV, Monitor Power Supply
UPS
Battery Charger
DC Motor Power Supply
Monitor Power Supply
Telecom System Power Supply
Distributed Power
Related Resources
AN-8027 - FAN480X PFC+PWM Combination
Controller Application
© 2010 Fairchild Semiconductor Corporation
FAN4800AS/CS/01S/02S • Rev. 1.0.2
Description
The highly integrated FAN4800AS/CS/01S/02S parts
are specially designed for power supplies that consist of
boost PFC and PWM. They require very few external
components to achieve versatile protections /
compensation. They are available in 16-pin DIP and
SOP packages.
The PWM can be used in either current or voltage
mode. In voltage mode, feed-forward from the PFC
output bus can reduce the secondary output ripple.
Compared with older productions, ML4800 and
FAN4800, FAN4800AS/CS/01S/02S have lower
operation current that saves power consumption in
external devices. FAN4800AS/CS/01S/02S have
accurate 49.9% maximum duty of PWM that makes the
hold-up time longer. Brownout protection and PFC soft-
start functions available in this series are not available in
ML4800 and FAN4800.
To evaluate FAN4800AS/CS/01S/02S for replacing
existing FAN4800 and ML4800 boards, five things must
be completed before the fine-tuning procedure:
1. Change RAC resister from the old value to a higher
resister: between 6 MΩ to 8 MΩ.
2. Change RT/CT pin from the existing values to
RT=6.8kΩ and CT=1000 pF to have fPFC=64 kHz
and fPWM=64 kHz.
3. The VRMS pin needs to be 1.224 V at VIN=85 VAC
for universal input application from line input from
85 VAC to 270 VAC.
4. At full load, the average VVEA needs to be ~4.5 V
and the ripple of VVEA needs to be less than
400 mV.
5. For the Soft-Start pin, the soft-start current has
been reduced to half the FAN4800 capacitor.
There are two differences from FAN4800A/C/01/02 to
FAN4800AS/CS/01S/02S:
1. Under-voltage protection debounce time is
extended to one second.
2. PWM gate clamp voltage is raised to 19 V.
www.fairchildsemi.com

PagesPages 19
Télécharger [ FAN4802S ]


Fiche technique recommandé

No Description détaillée Fabricant
FAN4802 PFC/PWM Controller Combination Fairchild Semiconductor
Fairchild Semiconductor
FAN4802L PFC/PWM Controller Combination Fairchild Semiconductor
Fairchild Semiconductor
FAN4802LMY PFC/PWM Controller Combination Fairchild Semiconductor
Fairchild Semiconductor
FAN4802LNY PFC/PWM Controller Combination Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche