|
|
PDF MPX2200D Data sheet ( Hoja de datos )
| Número de pieza | MPX2200D | |
| Descripción | On-Chip Temperature Compensated Silicon Pressure Sensors | |
| Fabricantes | Freescale Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MPX2200D (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
Freescale Semiconductor
+ 200 kPa On-Chip Temperature
Compensated Silicon
Pressure Sensors
The MPX2200 series devices are silicon piezoresistive pressure sensor
providing a highly accurate and linear voltage output directly proportional to
the applied pressure. The sensor is a single monolithic silicon diaphragm with
the strain gauge and a thin-film resistor network integrated on-chip. The chip
is laser trimmed for precise span and offset calibration and temperature
compensation. They are designed for use in applications such as pump/
motor controllers, robotics, level indicators, medical diagnostics, pressure
switching, barometers, altimeters, etc.
Features
• Temperature Compensated Over 0°C to +85°C
• ±0.25% Linearity (MPX2200D)
• Easy-to-Use Chip Carrier Package Options
• Absolute, Differential and Gauge Options
Pressure
MPX2200
Rev 13, 10/2008
MPX2200
Series
0 to 200 kPa (0 to 29 psi)
40 mV Full Scale Span
(Typical)
Application Examples
• Pump/Motor Control
• Robotics
• Level Detectors
• Medical Diagnostics
• Pressure Switching
• Barometers
• Altimeters
Device Name
Package
Options
Case
No.
Unibody Package (MPX2200 Series)
MPX2200A
Tray
344
MPX2200D
Tray
344
MPX2200DP
Tray
344C
MPX2200AP
Tray
344B
MPX2200GP
Tray
344B
None
ORDERING INFORMATION
# of Ports
Single
Dual
Gauge
Pressure Type
Differential Absolute
••
••
••
••
••
Device
Marking
MPX2200A
MPX2200D
MPX2200DP
MPX2200AP
MPX2200GP
UNIBODY PACKAGES
MPX2200A/D
CASE 344-15
MPX2200AP/GP
CASE 344B-01
MPX2200DP
CASE 344C-01
© Freescale Semiconductor, Inc., 2006-2008. All rights reserved.
1 page  
PRESSURE (P1)/VACUUM (P2) SIDE IDENTIFICATION TABLE
Pressure
Freescale designates the two sides of the pressure sensor
as the Pressure (P1) side and the Vacuum (P2) side. The
Pressure (P1) side is the side containing silicone gel which
isolates the die from the environment. The Freescale MPX
pressure sensor is designed to operate with positive
differential pressure applied, P1 > P2.
The Pressure (P1) side may be identified by using the
following table.
Table 3. Pressure (P1) Side Delineation
Part Number Case Type Pressure (P1) Side Identifier
MPX2200D/A
344 Stainless Steel Cap
MPX2200DP
344C Side with Part Marking
MPX2200GP/AP
344B Side with Port Attached
Sensors
Freescale Semiconductor
MPX2200
5
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet MPX2200D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MPX2200 | On-Chip Temperature Compensated & Calibrated Pressure Sensors |  Motorola Semiconductors |
| MPX2200 | On-Chip Temperature Compensated Silicon Pressure Sensors | Freescale Semiconductor |
| MPX2200A | On-Chip Temperature Compensated & Calibrated Pressure Sensors | Motorola Semiconductors |
| MPX2200A | On-Chip Temperature Compensated Silicon Pressure Sensors | Freescale Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |