DataSheetWiki


CG80C286-20 fiches techniques PDF

Intersil Corporation - High Performance Microprocessor with Memory Management and Protection

Numéro de référence CG80C286-20
Description High Performance Microprocessor with Memory Management and Protection
Fabricant Intersil Corporation 
Logo Intersil Corporation 





1 Page

No Preview Available !





CG80C286-20 fiche technique
80C286/883
March 1997
High Performance Microprocessor with Memory
Management and Protection
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Compatible with NMOS 80286/883
• Static CMOS Design for Low Power Operation
- ICCSB = 5mA Maximum
- ICCOP = 185mA Maximum (80C286-10/883)
- ICCOP = 220mA Maximum (80C286-12/883)
• Large Address Space
- 16 Megabytes Physical
- 1 Gigabyte Virtual per Task
• Integrated Memory Management, Four-Level Memory
Protection and Support for Virtual Memory and
Operating Systems
• Two 80C86 Upward Compatible Operating Modes
- 80C286/883 Real Address Mode
- Protected Virtual Address Mode
• Compatible with 80287 Numeric Data Co-Processor
The Intersil 80C286/883 is a static CMOS version of the
NMOS 80286 microprocessor. The 80C286/883 is an
advanced, high-performance microprocessor with specially
optimized capabilities for multiple user and multi-tasking sys-
tems. The 80C286/883 has built-in memory protection that
supports operating system and task isolation as well as pro-
gram and data privacy within tasks. The 80C286/883
includes memory management capabilities that map 230
(one gigabyte) of virtual address space per task into 224
bytes (16 megabytes) of physical memory.
The 80C286/883 is upwardly compatible with 80C86 and
80C88 software (the 80C286/883 instruction set is a super-
set of the 80C86/80C88 instruction set). Using the 80C286/
883 real address mode, the 80C286/883 is object code com-
patible with existing 80C86 and 80C88 software. In protected
virtual address mode, the 80C286/883 is source code com-
patible with 80C86 and 80C88 software but may require
upgrading to use virtual address as supported by the
80C286/883’s integrated memory management and protec-
tion mechanism. Both modes operate at full 80C286/883
performance and execute a superset of the 80C86 and
80C88 instructions.
The 80C286/883 provides special operations to support the
efficient implementation and execution of operating systems.
For example, one instruction can end execution of one task,
save its state, switch to a new task, load its state, and start
execution of the new task. The segment-not-present excep-
tion and restartable instructions.
Ordering Information
PACKAGE TEMP. RANGE
10MHz
12.5MHz
16MHz
68 Pin PGA 0oC to +70oC
-
CG80C286-12
CG80C286-16
-40oC to +85oC IG80C286-10
IG80C286-12
-
-55oC to +125oC MG80C286-10/883 MG80C286-12/883
-
5962-9067801MXC 5962-9067802MXC
-
20MHz
CG80C286-20
-
-
-
25MHz
-
-
-
-
PKG. NO.
G68.B
G68.B
G68.B
G68.B
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
3-128
File Number 2948.1

PagesPages 13
Télécharger [ CG80C286-20 ]


Fiche technique recommandé

No Description détaillée Fabricant
CG80C286-20 High Performance Microprocessor with Memory Management and Protection Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche