XE232NET Datasheet PDF - XECOM
| Part Number | XE232NET | |
| Description | Low Cost Serial-to-Ethernet Bridge | |
| Manufacturers | XECOM | |
| Logo |  |
|
|
There is a preview and XE232NET download ( pdf file ) link at the bottom of this page. Total 12 Pages | ||
Preview 1 page No Preview Available !
Preliminary
XE232NET
June 2007
Low Cost Serial-to-Ethernet Bridge for Embedded Applications
Description
The Xecom XE232NET Serial-to-Ethernet Bridge
modules provide a simple solution for connecting
micro-controller based embedded systems to a Local
Area Network. These modules include all of the
hardware and software needed to link the serial port
on the micro-controller to the local area network.
The XE232NET Serial-to-Ethernet bridge operates
much the same as any Xecom serial modem. AT
commands are used for control and configuration of
The XE232NET. The XE232NET also utilizes the
same pin configuration as the Xecom XE5690SM
modem family. This permits one design to support
either Ethernet or dial-up modem connectivity with a
simple module swap.
Xecom offers two versions of the XE232NET. The
XE232NET-1 with the Ethernet isolation transformer
and the XE232NET-2 without the isolation
transformer. An Evaluation Kit is available, model
number XE232NET-K
Features
• Miniature Dual-In-line Package: 2.1” x 1.0”
• TTL compatible serial interface;
• Operates from a single +3.3 volt power supply
• Includes 10 Base-T Ethernet MAC and PHY
• Embedded protocols include, Ethernet, TCP, IP, UDP,
ICMP, DHCP, ARP, HTTP, POP3, and SMTP
• Command and control with Serial AT Commands
• IEEE 10BASE-T compatible
Models
• XE232NET-1: Serial-to-Ethernet Bridge module with
Ethernet isolation transformer included
• XE232NET-2: Serial-to-Ethernet Bridge module
without isolation transformer.
• XE232NET-K: Ethernet Evaluation Kit includes
XE232NET-1; evaluation board, required cables, and
power supply
• XE232NET-1ITR: XE232NET-1 with an operating
range of -40C to +85C
• XE232NET-2ITR: XE232NET-2 with an operating
range of -40C to +85C
XE232NET Block Diagram
XECOM
1 XE232NET
|
| |
 
XE232NET Electrical Specifications
Parameter
VCC
ICC
Network Isolation
Voh
Vol
Vih
Vil
Min Typ Max Units Comments
3.13 3.3 3.47 Volts
145 mA On Line
0.35 mA Sleep
1500 VAC XE232NET-1
2.4 5.0 Volts
0.4 Volts
2.0 5.0 Volts
-0.3 0.8 Volts
XE232NET ABSOLUTE MAXIMUM RATINGS
Storage Temperature -25O C to +85O C
1 Maximum Operating Temperature Range 0O C to +70O C
VCC 3.6 Volts
1 The XE232NET can be ordered with an Operating Temperature of -40O C to +85O C at extra cost.
Order XE232NET-1ITR or XE232NET-2ITR to specify Industrial Temperature Range (ITR).
XECOM
5 XE232NET
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for XE232NET electronic component. |
| Information | Total 12 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ XE232NET.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| XE232NET | The function is Low Cost Serial-to-Ethernet Bridge. XECOM | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
XE23
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||