DataSheetWiki


EPL2010-681ML fiches techniques PDF

Coilcraft - Shielded Power Inductors

Numéro de référence EPL2010-681ML
Description Shielded Power Inductors
Fabricant Coilcraft 
Logo Coilcraft 





1 Page

No Preview Available !





EPL2010-681ML fiche technique
Document 584-1
Shielded Power Inductors – EPL2010
• Smallest shielded power inductors; 2.0 × 2.0 × 1 mm high
• Extremely low DCR and very high SRF ratings
Isat ratings as high as 2.9 A
Designer’s Kit C412 contains 5 each of all values
Core material Ferrite
Environmental  RoHS compliant, halogen free
Core and winding loss See www.coilcraft.com/coreloss
Terminations  Since August, 2008: RoHS compliant tin-silver-copper
(96.5/3/0.5) over tin over nickel over silver-platinum. Prior to August,
2008: RoHS compliant tin‑silver-copper over gold over nickel over
silver-platinum.
Weight  13 – 18 mg
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7reel; 7500/13reel  Plastic tape:  8 mm wide,
0.28 mm thick, 4 mm pocket spacing, 1.3 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2
±20% (µH)
DCR (Ohms)3
nom    max
SRF typ4Isat (A)5
(MHz)
10% drop 20% drop 30% drop
Irms (A)6
20°C rise  40°C rise
EPL2010-181ML_ 0.18 0.024 0.029 615 1.3 2.2 2.9
EPL2010-271ML_ 0.27 0.032 0.038 412 1.2 2.1 2.6
EPL2010-301ML_  This part number has been changed to EPL2010-271. The EPL2010-301 is not available
EPL2010-421ML_ 0.42 0.040 0.048 283 1.0 1.6 2.2
EPL2010-471ML_  This part number has been changed to EPL2010-421. The EPL2010-471 is not available
EPL2010-681ML_ 0.68 0.058 0.070 214 0.80 1.3 2.0
EPL2010-821ML_ 0.82 0.068 0.082 173 0.70 1.2 1.6
2.37 3.17
1.76 2.31
1.66 2.16
1.48 1.94
1.28 1.68
EPL2010-102ML_ 1.0
EPL2010-152ML_ 1.5
EPL2010-222ML_ 2.2
EPL2010-332ML_ 3.3
EPL2010-472ML_ 4.7
0.099 0.119
0.141 0.155
0.202 0.222
0.272 0.299
0.429 0.472
145
102
80
63
50
0.65 1.0 1.35
0.60 0.95 1.30
0.43 0.78 1.05
0.35 0.63 0.85
0.30 0.47 0.65
1.04 1.36
0.799 1.04
0.751 0.978
0.671 0.879
0.527 0.680
EPL2010-682ML_ 6.8
EPL2010-822ML_ 8.2
EPL2010-103ML_ 10
EPL2010-123ML_ 12
0.512 0.563
0.827 0.910
0.914 1.00
0.939  1.12
46
42
33
32
0.24 0.43 0.57
0.22 0.40 0.53
0.20 0.35 0.47
0.15 0.26 0.35
0.440 0.575
0.415 0.520
0.392 0.495
0.380 0.480
1. When ordering, please specify termination and packaging codes:
EPL2010-103MLC
Termination: L = RoHS compliant tin-silver-copper over tin over nickel
Special order, added cost: S = non-RoHS tin-lead
(63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 584-1  Revised 09/08/15

PagesPages 2
Télécharger [ EPL2010-681ML ]


Fiche technique recommandé

No Description détaillée Fabricant
EPL2010-681ML Shielded Power Inductors Coilcraft
Coilcraft

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche