|
|
Número de pieza | EPL2014-601ML | |
Descripción | Shielded Power Inductors | |
Fabricantes | Coilcraft | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de EPL2014-601ML (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Document 583-1
Shielded PowerInductors– EPL2014
• Extremely low DCR and very high SRF ratings
• Isat ratings as high as 2.8 A
Designer’s Kit C413 contains 5 each of all values
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations Since March, 2009: RoHS compliant tin-silver-copper
(96.5/3/0.5) over tin over nickel over silver-platinum. Prior to March,
2009: RoHS compliant tin‑silver-copper over gold over nickel over silver-
platinum.
Weight 20 – 25 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.28 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2
±20% (µH)
DCR (Ohms)3
nom max
SRF typ4 Isat (A)5
(MHz)
10% drop 20% drop 30% drop
Irms (A)6
20°C rise 40°C rise
EPL2014-271ML_ 0.27 0.030 0.036 570 1.50 2.30 2.80
EPL2014-301ML_ This part number has been changed to EPL2014-271. The EPL2014-301 is not available
EPL2014-421ML_ 0.42 0.037 0.044 438 1.40 2.00 2.40
EPL2014-471ML_ This part number has been changed to EPL2014-421. The EPL2014-471 is not available
EPL2014-601ML_ 0.60 0.043 0.052 290 1.20 1.80 2.25
EPL2014-821ML_ 0.82 0.051 0.061 163 0.950 1.40 1.75
EPL2014-102ML_ 1.0 0.059 0.071 153 0.900 1.30 1.68
2.04 2.73
1.93 2.57
1.83 2.43
1.49 2.03
1.43 1.94
EPL2014-152ML_ 1.5
EPL2014-222ML_ 2.2
EPL2014-332ML_ 3.3
EPL2014-472ML_ 4.7
EPL2014-682ML_ 6.8
0.075 0.086
0.120 0.132
0.152 0.167
0.231 0.254
0.287 0.316
109
80
62
46
44
0.720 1.20 1.60
0.600 0.980 1.30
0.540 0.800 1.10
0.380 0.650 0.880
0.350 0.590 0.800
1.34 1.86
1.07 1.42
0.923 1.23
0.788 1.06
0.676 0.915
EPL2014-822ML_ 8.2
EPL2014-103ML_ 10
0.378 0.416 39
0.440 0.459 33
0.290 0.500 0.680 0.640 0.849
0.250 0.450 0.600 0.564 0.729
1. When ordering, please specify termination and packaging codes:
EPL2014-103MLC
Termination: L = RoHS compliant tin-silver-copper over tin over nickel
Special order, added cost: S = non-RoHS tin-lead
(63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 583-1 Revised 09/08/15
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet EPL2014-601ML.PDF ] |
Número de pieza | Descripción | Fabricantes |
EPL2014-601ML | Shielded Power Inductors | Coilcraft |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |