DataSheetWiki


EPL3010-301ML fiches techniques PDF

Coilcraft - Shielded Power Inductors

Numéro de référence EPL3010-301ML
Description Shielded Power Inductors
Fabricant Coilcraft 
Logo Coilcraft 





1 Page

No Preview Available !





EPL3010-301ML fiche technique
Document 615-1
Shielded Power Inductors – EPL3010
• Low profile shielded power inductors, 3 × 3 × 1 mm
• Extremely low DCR,high SRF ratings, Isat ratings up to 2.2 A
Designer’s Kit C431 contains 5 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weight  32 – 38 mg
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7reel; 7500/13reel;  Plastic tape:  8 mm wide,
0.20 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2 DCR nom3 DCR max3 SRF typ4Isat (A)5
±20% (µH)
(Ohms)
(Ohms)
(MHz)
10% drop 20% drop 30% drop
Irms (A)6
20°C rise  40°C rise
EPL3010-301ML_ 0.30 0.040 0.045 249
EPL3010-102ML_ 1.0 0.071 0.078 151
EPL3010-152ML_ 1.5 0.086 0.095 116
EPL3010-222ML_ 2.2 0.137 0.150 98
EPL3010-472ML_ 4.7 0.278 0.306 60
1.0 1.6 2.2
0.80 1.3 1.8
0.68 1.1 1.6
0.54 0.92 1.3
0.36 0.61 0.80
1.7 2.2
1.2 1.7
1.2 1.6
0.98 1.3
0.74 0.99
EPL3010-103ML_ 10
EPL3010-223ML_ 22
0.573 0.631 38 0.20 0.34 0.48
1.25 1.38 27 0.18 0.30 0.42
0.52 0.70
0.35 0.47
1. When ordering, please specify packaging code:
EPL3010-103MLC
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 615-1  Revised 09/08/15

PagesPages 2
Télécharger [ EPL3010-301ML ]


Fiche technique recommandé

No Description détaillée Fabricant
EPL3010-301ML Shielded Power Inductors Coilcraft
Coilcraft

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche