|
|
PDF LC88F58B0A Data sheet ( Hoja de datos )
| Número de pieza | LC88F58B0A | |
| Descripción | 16-bit 1-chip Microcontroller | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC88F58B0A (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Ordering number : ENA1951
LC88F58B0A
CMOS IC
FROM 128K byte, RAM 6K byte on-chip
16-bit 1-chip Microcontroller
http://onsemi.com
Overview
The LC88F58B0A is a 16-bit microcomputer that, centered around an Xstromy16 CPU, integrates on a single chip a
number of hardware features such as 128K-byte flash ROM (onboard programmable), 6K-byte RAM, six 16-bit
timers, a base timer serving as a time-of-day clock, two synchronous SIO interfaces with automatic transmission
capability, a single master I2C/synchronous SIO interface, two asynchronous SIO (UART) interfaces, a 11-channel
12-bit resolution AD converter, a motor drive signal generator circuit, two multifrequency 12-bit PWM modules, a
watchdog timer, a system clock frequency divider, a 40-source (24 modules) 16-vector interrupt feature, and on-chip
debugger feature.
Features
Xstromy16 CPU
• 4G-byte address space
• General-purpose registers: 16 bits × 16 registers
Flash ROM
• Capable of onboard programming with a wide range of voltage levels (3.0 to 5.5V).
• Block-erasable in 128 or 1K byte units.
• Data written in 2-byte units.
• 131072 × 8 bits
RAM
• 6144 × 8 bits
* This product is licensed from Silicon Storage Technology, Inc. (USA).
Semiconductor Components Industries, LLC, 2013
May, 2013
Ver.1.03
41311HKIM 20080924-S00002 No.A1951-1/31
1 page  
LC88F58B0A
Standby Function
• HALT mode: Halts instruction execution while allowing the peripheral circuits to continue operation.
1) Oscillation is not stopped automatically.
2) Released by a system reset or occurrence of an interrupt.
• HOLD mode: Suspends instruction execution and the operation of the peripheral circuits.
1) OSC1, RC and OSC0 oscillators automatically stop.
2) There are three ways of releasing the HOLD mode.
(1) Setting the reset pin to the low level
(2) Setting at least one of the INT0, INT1, INT2, INT4, INT5, INT6, and INT7 pins to the specified level
(3) Having an interrupt source established at port 0
(4) Having an interrupt established at SIO0 or SIO1
(5) Having an interrupt established at UART2
• HOLDX mode: Suspends instruction execution and the operation of the peripheral circuits except those which run
on OSC0.
1) OSC1 and RC oscillations automatically stop.
2) OSC0 maintains the state that is established when the HOLDX mode is entered.
3) There are four ways of releasing the HOLDX mode.
(1) Setting the reset pin to the low level
(2) Setting at least one of the INT0, INT1, INT2, INT4, INT5, INT6, and INT7 pins to the specified level
(3) Having an interrupt source established at port 0
(4) Having an interrupt source established at the base timer circuit
(5) Having an interrupt established at SIO0 or SIO1
(6) Having an interrupt established at UART2
On-chip Debugger Function
• Supports software debugging with the IC mounted on the target board.
• Supports source line debugging and tracing functions, and breakpoint setting.
• Single-wire communication
Package Form
• SQFP64 (10×10): Lead-free and halogen-free type
Development Tools
• On-chip debugger: EOCUIF1 + LC88F58B0A
Programming Board
Package
SQFP64 (10 × 10)
Programming Board
W88F58SQ
Flash Programming
Manufacturer
Flash Support Group (Single)
Flash Support Group (Gang)
Our company
Model Name
AF9708/09/09B/09C
AF9723/23B
AF9833
SKK/SKK Type-B
Supported Version
Revison : After Rev.03.04
Revison : After Rev.02.29
Revison : After Rev.01.90
Revison : After Rev.01.13
Device
LC88F58B0A
LC88F58B0A
LC88F58B0A
No.A1951-5/31
5 Page 
LC88F58B0A
Absolute Maximum Ratings at Ta = 25°C, VSS1 = VSS2 = VSS3 = 0V
Parameter
Maximum supply
voltage
Symbol
VDD max
Applicable Pin
/Remarks
VDD1, VDD2, VDD3
Conditions
VDD1=VDD2=VDD3
VDD[V]
min
-0.3
Specification
typ max
unit
+6.5
Input voltage
Input/output
voltage
VI(1)
VIO(1)
CF1, RESB
Ports 0, 1, 2
Ports 3, 4
Ports 6, 7
Ports A, C
-0.3 VDD
+0.3
V
-0.3 VDD
+0.3
Peak output
current
IOPH(1)
Ports 0, 1, 2
P70 to P72
P40 to P45
CMOS output selected
Per applicable pin
-10
PA0 to PA3
IOPH(2)
P46, P47
Per applicable pin
-20
IOPH(3)
Port 6
Per applicable pin
P30 to P33
PC2
-5
Average
output
current
IOMH(1)
Ports 0, 1, 2
P70 to P72
P36 to P37
CMOS output selected
Per applicable pin
-7.5
(Note 1-1)
P40 to P45
PA0 to PA3
IOMH(2)
P46, P47
Per applicable pin
-10
IOMH(3)
Port 6
Per applicable pin
P30 to P33
PC2
-3
Total output
current
ΣIOAH(1)
P30 to P33, PC2
Total of currents at
applicable pins
-15 mA
ΣIOAH(2)
Port 6
Total of currents at
applicable pins
-15
ΣIOAH(3)
Port 6
P30 to P33
Total of currents at
applicable pins
-20
PC2
ΣIOAH(4)
Ports 0, 1
P25 to P27
Total of currents at
applicable pins
-25
ΣIOAH(5)
P20 to P24
Total of currents at
applicable pins
-25
ΣIOAH(6)
Ports 0, 1, 2
Total of currents at
applicable pins
-45
ΣIOAH(7)
P40 to P45
PA0 to PA3
Total of currents at
applicable pins
-25
ΣIOAH(8)
P46 to P47
P70 to P72
Total of currents at
applicable pins
-25
ΣIOAH(9)
Port 4
P70 to P72
Total of currents at
applicable pins
-45
PA0 to PA3
Note 1-1: Average output current refers to the average of output currents measured for a period of 100ms.
Continued on next page.
No.A1951-11/31
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet LC88F58B0A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC88F58B0A | 16-bit 1-chip Microcontroller | ON Semiconductor |
| LC88F58B0A | 16-bit 1-chip Microcontroller |  Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |