|
|
PDF RFFM4527 Data sheet ( Hoja de datos )
| Número de pieza | RFFM4527 | |
| Descripción | Wi-Fi Low Noise Amplifier | |
| Fabricantes | RFMD | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RFFM4527 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
RFMD + TriQuint = Qorvo
RFFM4527
Wi-Fi Low Noise Amplifier
4900MHz to 5925MHz
Product Description
The RFFM4527 is a low noise amplifier (LNA) designed for Wi-Fi
802.11a/n/ac systems. The integrated input and output 50Ω match
minimizes layout area in the customer’s application, reduces the
bill of materials and manufacturability cost. Performance is focused
on a balance of low noise and gain that increases the receive
sensitivity. The RFFM4527 integrates a bypass path that enables
a defined gain step. The device is provided in a 1.6mm x 1.6mm x
0.5mm, 6-pin DFN package.
Package: DFN, 6-pin,
1.6mm x 1.6mm x 0.5mm max
Features
Noise Figure = 1.6dB
LNA Gain = 16dB
Bypass Loss = 6dB
Input and Output Matched to 50Ω
Integrated 2.4GHz Rejection Filter
VCC RF_OUT GND
654
Applications
Wireless Routers
Access Points
Residential Gateways
Consumer Premise Equipment
Small Cell
Internet of Things
123
CTRL RF_IN GND
Functional Block Diagram
Ordering Information
PART NUMBER
RFFM4527SB
RFFM4527SQ
RFFM4527SR
RFFM4527TR7
RFFM4527PCK-410
DESCRIPTION
Sample bag with 5 pieces
Sample bag with 25 pieces
7" Reel with 100 pieces
7" Reel with 2500 pieces
Assembled Evaluation Board + 5 pieces
Revision DS20160203
1 of 5
Disclaimer: Subject to change without notice
www.rfmd.com / www.qorvo.com
1 page  
RFMD + TriQuint = Qorvo
Pin Out
VCC RF_OUT GND
654
RFFM4527
Wi-Fi Low Noise Amplifier
4900MHz to 5925MHz
123
CTRL RF_IN GND
Pin Names and Descriptions
PIN
1
2
3
4
5
6
Pkg Base
NAME
CTRL
RF_IN
GND
GND
RF_OUT
VCC
GND
DESCRIPTION
Control voltage for switch to toggle LNA or Bypass modes.
RF input port. This port is matched to 50Ω and DC blocked.
Not connected internally and can be left floating or connected to ground. Connecting this pin to
ground is recommended.
Not connected internally and can be left floating or connected to ground. Connecting this pin to
ground is recommended.
RF output port. This port is matched to 50Ω and DC blocked.
Supply voltage for LNA
Ground connection. The backside of the package should be connected to the ground plane
through a short path, i.e., PCB vias under the device are recommended.
Revision DS20160203
© 2016 RF Micro Devices, Inc.
5 of 7
Disclaimer: Subject to change without notice
www.rfmd.com / www.qorvo.com
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet RFFM4527.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RFFM4527 | Wi-Fi Low Noise Amplifier | RFMD |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |