DataSheet39.com

What is LA2900M?

This electronic component, produced by the manufacturer "Sanyo Semicon Device", performs the same function as "Two-Channel High-Output Line Amplifier for Car Audio Systems".


LA2900M Datasheet PDF - Sanyo Semicon Device

Part Number LA2900M
Description Two-Channel High-Output Line Amplifier for Car Audio Systems
Manufacturers Sanyo Semicon Device 
Logo Sanyo Semicon Device Logo 


There is a preview and LA2900M download ( pdf file ) link at the bottom of this page.





Total 5 Pages



Preview 1 page

No Preview Available ! LA2900M datasheet, circuit

Ordering number : ENN6950A
Monolithic Linear IC
LA2900M
Two-Channel High-Output Line Amplifier
for Car Audio Systems
Overview
The LA2900M is a 2-channel high-output line amplifier
IC developed for use in car audio systems. It can provide
significant improvements in the signal-to-noise ratio when
used to drive an external power amplifier due to its
significantly increased output voltage as compared to that
of earlier preamplifiers.
Package Dimensions
unit: mm
3036C-MFP20
[LA2900M]
20 11
The high output of the LA2900M allows it to achieve a
high signal-to-noise ratio and excellent fidelity in audio
systems in which the main unit is connected to an external
amplifier, and can improve the performance of the power
amplifier in such systems.
Functions and Features
• High output level (5.3 V rms)
• Low output noise voltage (12 µV)
• Low total harmonic distortion (0.003%)
• High ripple rejection ratio (70 dB)
• Excellent audio fidelity
1 10
12.5 0.15
0.35 1.27 (0.4)
SANYO: MFP20 (300mil)
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
Pd max
Topr
Tstg
Conditions
With no input signal
Ta 85°C, Mounted on a printed circuit board
(114.3 × 76.1 × 1.6 mm3, glass epoxy)
Ratings
12
400
–40 to +85
–40 to +150
Unit
V
mW
°C
°C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N1501TN (OT)/51101RM (OT) No. 6950-1/5

line_dark_gray
LA2900M equivalent
LA2900M
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products must
not be exported without obtaining the export license from the authorities concerned in accordance with the
above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of November, 2001. Specifications and information herein are
subject to change without notice.
PS No. 6950-5/5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for LA2900M electronic component.


Information Total 5 Pages
Link URL [ Copy URL to Clipboard ]
Download [ LA2900M.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
LA2900The function is Two-Channel High-Output Line Amplifier for Car Audio Systems. Sanyo Semicon DeviceSanyo Semicon Device
LA2900MThe function is Two-Channel High-Output Line Amplifier for Car Audio Systems. Sanyo Semicon DeviceSanyo Semicon Device

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

LA29     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search