DataSheet.es    


PDF LA2610 Data sheet ( Hoja de datos )

Número de pieza LA2610
Descripción Analog Surround Processing IC
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de LA2610 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! LA2610 Hoja de datos, Descripción, Manual

Ordering number:EN6173
Monolithic Linear IC
LA2610
Analog Surround Processing IC
Overview
The LA2610 is an ambiance reproduction processor for
use in audio, TV, and personal computer equipment
applications. This IC easily reproduces a live space filled
with a sense of presence by processing stereo signals
from musical and audio-visual sources.
Features
• Wide operating supply voltage range allows various
applications to be used.
• Aggregate level tuning is possible for surround signals
and bass-boost signals.
• Miniature package and fewer external components
allow the mounting area to be reduced.
• Bypass mode for low noise and low distortion ratio.
Functions
• Surround signal processing.
• Simple bass-boost.
• Switching between surround and bypass modes.
Package Dimensions
unit:mm
3116-SIP12S
[LA2610]
22.3
3.0
1
1.36 1.78
0.5
12
1.1
0.25
1.475
SANYO : SIP12S
Package
• SIP12S
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage Temperature
Symbol
VCC max
Pd max
Topr
Tstg
Ta70˚C
Operating Conditions at Ta = 25˚C
Parameter
Recommended supply voltage
Operating supply voltage range
Symbol
VCC
VCC op
Conditions
Conditions
Ratings
13
100
–25 to +70
–40 to +125
Unit
V
mW
˚C
˚C
Ratings
9.0
4.5 to 12
Unit
V
V
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
53199RM (KT) No.6173–1/5

1 page




LA2610 pdf
LA2610
External Parts Description
Parts
C2
Description
Bass-boost low-pass filter capacitor
Bass-boost cutoff frequency is varied according to this capacitance
R1
Determines bass-boost gain
Bass-boost gain is varied according to this resistance
C4, R2
Left and right surround signals level can be changed by adding these
components externally
C6, C7
Surround effect varying capacitor
Surround effect can be changed with these parts' capacitance
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of May, 1999. Specifications and information herein are subject to
change without notice.
PS No.6173–5/5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet LA2610.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LA2610Analog Surround Processing ICSanyo Semicon Device
Sanyo Semicon Device
LA2615Analog Surround IC Featuring the AViSSTM 3D Surround AlgorithmSanyo Semicon Device
Sanyo Semicon Device
LA2615MAnalog Surround IC Featuring the AViSSTM 3D Surround AlgorithmSanyo Semicon Device
Sanyo Semicon Device

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar